Effect of radial inlet distortion on aerodynamic stability in a high load axial flow compressor
- 1 October 2024
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
Abstract
Radial inlet distortion induced by boundary layer separation can significantly affect the aerodynamic performance of the compressor. The effect of radial inlet distortion on the flow structure is numerically investigated in a high load axial flow compressor. The inlet boundary is determined by the experimental results at the downstream of the distortion generator. The results reveal that tip distortion leads to a reduction in the stall margin, whereas hub distortion extends it. Radial distortion redistributes the main flow toward undistorted region due to the obstructive effect of lattice ring. The deficit in axial velocity with tip radial distortion causes the rotor to operate at a higher incidence angle near the casing, while hub radial distortion alleviates the tip blade loading. The detailed three-dimensional flow field analysis indicates that increased blade loading with tip distortion shifts the trajectories of both primary and secondary tip leakage flow toward the leading edge, thereby expanding the blockage region. Conversely, hub radial distortion unloads the rotor tip region, thereby reducing the blockage region induced by tip leakage flow. Additionally, with hub distortion, the location of separation line on the blade suction surface moves closer to the leading edge, and the flow separation around the trailing edge is intensified.Keywords
Funding Information
- National Science and Technology Major Project (J2019-II-0020-0041)
- National Natural Science Foundation of China (52406061)
- National Natural Science Foundation of China (52206061)
This publication has 33 references indexed in Scilit:
- Design Optimization of Non-Axisymmetric Vane for an Axial Compressor under Inlet DistortionJournal of Thermal Science, 2023
- Adaptive feedback control of stability in an axial compressor with circumferential inlet distortionChinese Journal of Aeronautics, 2023
- Hybrid Slot-Groove Casing Treatment for Stall Margin Improvement on an Axial Flow Compressor with Circumferential Total Pressure DistortionJournal of Thermal Science, 2023
- Transient nature of secondary vortices in an axial compressor stage with a tandem rotorPhysics of Fluids, 2022
- Stall Behaviour in a Mixed-flow Compressor with Axial Slot Casing TreatmentJournal of Thermal Science, 2022
- Design optimization of axial slot casing treatment in a highly-loaded mixed-flow compressorAerospace Science and Technology, 2020
- Effect of inlet radial distortion on aerodynamic stability in a multi-stage axial flow compressorAerospace Science and Technology, 2020
- Tip air injection to extend stall margin of multi-stage axial flow compressor with inlet radial distortionAerospace Science and Technology, 2020
- Review of tip air injection to improve stall margin in axial compressorsProgress in Aerospace Sciences, 2019
- Influence of SPS casing treatment on axial flow compressor subjected to radial pressure distortionChinese Journal of Aeronautics, 2017