Effects of Mechanical Stress on Insulation Structure and Performance of HV Cable
Open Access
Abstract
Mechanical stresses generated during manufacturing and laying process of high voltage cables can result in degradation of insulation properties, affecting the stable operation of the transmission system. Traditional test methods for testing the effect of mechanical stress on the insulation properties of polyethylene still have some shortcomings to be explored and it is able to explain the changes of the insulation properties of polyethylene under mechanical stress from a microscopic perspective. In order to further study the effect of stress on the insulation properties of polyethylene, microstructural changes, the breakdown field strength, conductivity and charge distribution of polyethylene at different elongation rates are investigated by a combination of experimental and molecular dynamics simulations. The results show that the increase in stress leads to a decrease in crystallinity and microcrystalline size of the material decrease. The untwisting and orientation of the polyethylene molecular chains during the stretching process can create cavities, resulting in an uneven sample distribution and thickness reduction, leading to a reduction in the breakdown field strength. Meanwhile, some crystal regions are transformed into amorphous regions. The loose amorphous regions facilitate the directional migration of carriers, resulting in the increase of conductivity. When the elongation ratio is smaller, the distance between the molecular chains increases and the trap depth of the specimen becomes shallower. This facilitates the migration of ions and electrons and increases the rate of decay of the surface potential. When the stretch is further increased, new traps are created by broken molecular chains to limit the movement of charges, decreasing the decay rate of the surface potential and reducing the insulation properties of the polyethylene. Meanwhile, the molecular dynamics model of semi-crystalline polyethylene was developed to observe the microstructure and energy changes during the stretching process. The conclusions in terms of tensile tests were verified from a microscopic perspective.Keywords
Funding Information
- State Grid Corporation of China Science and Technology Project (TSS2021-18, E2021521003)
- Hebei Natural Science Foundation Project (TSS2021-18, E2021521003)
This publication has 37 references indexed in Scilit:
- Thermal decomposition of wood: Influence of wood components and cellulose crystallite sizeBioresource Technology, 2012
- Effect of the molecular structure of semicrystalline polyethylene on mechanical properties studied by molecular dynamicsJournal of Applied Polymer Science, 2012
- Molecular dynamics simulations of deformation mechanisms of amorphous polyethylenePolymer, 2010
- From LDPE to XLPE: investigating the change of electrical properties. part II: luminescenceIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- A Model Treating Tensile Deformation of Semicrystalline Polymers: Quasi-Static Stress−Strain Relationship and Viscous Stress Determined for a Sample of PolyethyleneMacromolecules, 2004
- Model Treatment of Tensile Deformation of Semicrystalline Polymers: Static Elastic Moduli and Creep Parameters Derived for a Sample of PolyethyleneMacromolecules, 2004
- Interfaces are the dominant feature of dielectrics at the nanometric levelIEEE Transactions on Dielectrics and Electrical Insulation, 2004
- Influence of post-manufacturing residual mechanical stress and crosslinking by-products on dielectric strength of HV extruded cablesIEEE Transactions on Dielectrics and Electrical Insulation, 2002
- Electric strength of polymersJournal of Physics D: Applied Physics, 1996
- Theory of Isothermal Currents and the Direct Determination of Trap Parameters in Semiconductors and Insulators Containing Arbitrary Trap DistributionsPhysical Review B, 1973