Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics
Open Access
- 11 October 2016
- journal article
- research article
- Published by Wiley in International Journal of Polymer Science
- Vol. 2016, 1-16
Abstract
The welding factors are significantly lower in welding of fiber reinforced thermoplastics than in welding of unreinforced thermoplastics due to the fiber orientation in the weld. This paper presents results from investigations on the influence of the initial fiber orientation on the weld strength in hot plate and vibration welding for glass fiber reinforced polypropylene and polyamide 6. Injection molded specimens are compared to specimens with main initial fiber orientation being longitudinal and transverse to the joining direction. The results of CT analysis of the fiber orientation in the weld show the opportunity to achieve a higher weld strength by using specimens with fibers being initially oriented longitudinally to the joining direction. The influence of the initial fiber orientation in the parts to be welded on the weld strength in hot plate welding is more distinct than in vibration welding.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Energie
This publication has 11 references indexed in Scilit:
- The Influence of Interface Geometry on the Joint Strengths of Hot Plate Welded CompositesJournal of Reinforced Plastics and Composites, 2009
- Optimized Mechanical Performance of Welded and Molded Butt Joints: Part I — Similarities and DifferencesJournal of Reinforced Plastics and Composites, 2003
- Vibration Welding of Continuously Reinforced Thermoplastic CompositesJournal of Thermoplastic Composite Materials, 2001
- Welding of thermoplastics reinforced with random glass matPolymer Engineering & Science, 1997
- Comparative Investigations into the Welding of Glass-Fiber-Reinforced PESJournal of Thermoplastic Composite Materials, 1993
- Fiber orientation in simple injection moldings. Part II: Experimental resultsPolymer Composites, 1992
- The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber CompositesJournal of Rheology, 1987
- Orientation Behavior of Fibers in Concentrated SuspensionsJournal of Reinforced Plastics and Composites, 1984
- Die Glasfaserorientierung und ihr Einfluß auf die mechanischen Eigenschaften thermoplastischer Spritzgießteile — Eine AbschätzmethodeColloid and Polymer Science, 1982
- Hot plate welding of plastics: Factors affecting weld strengthPolymer Engineering & Science, 1980