Thermal and dynamic mechanical characterization of acrylic bone cements modified with biodegradable polymers
- 27 September 2012
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 128 (5) , 3455-3464
Abstract
In this work, a thermal and a dynamic mechanical study of new formulations self‐curing acrylic bone cements is reported. The basic formulation of poly(methylmethacrylate) (PMMA)‐based acrylic bone cements has been modified with biodegradable polyesters such as poly(l‐lactic acid), poly(β‐hydroxybutyrate), and different kinds of thermoplastic starches. Differential scanning calorimetry (DSC) (dynamic and isothermal conditions), thermogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), and scanning electron microscopy (SEM) were used to determine the influence of the biodegradable polymer in the behavior of the biomedical formulations. DSC assay revealed a strong dependence of the polymerization enthalpy (ΔHcur) with increasing solid : liquid ratio and a low influence of the nature of the added biodegradable polymer on glass transition. TGA analysis showed the different mechanism of PMMA‐biodegradable polymer interaction depending on the solubilization of the added polymer in methylmethacrylate monomer during curing. DMTA showed the reinforcing capacity of segregated phases of the polymer included in the cement. The solubilization of aliphatic polyesters in the resulting PMMA polymerized phase led to a drop in mechanical stiffness observed from storage modulus (E′) profiles. Moreover, tan δ shifts to higher temperatures (4–7°C) during a second scan, confirming the presence of residual monomer content. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013Keywords
This publication has 31 references indexed in Scilit:
- Increased Antibiotic Release from a Bone Cement Containing Bacterial CelluloseClinical Orthopaedics and Related Research, 2011
- Evaluation of the influence of the addition of biodegradable polymer matrices in the formulation of self-curing polymer systems for biomedical purposesActa Biomaterialia, 2009
- The in vitro bioactivity of two novel hydrophilic, partially degradable bone cementsActa Biomaterialia, 2007
- Acrylic bone cements with bismuth salicylate: Behavior in simulated physiological conditionsJournal of Biomedical Materials Research Part A, 2006
- Preparation of acrylic bone cements for vertebroplasty with bismuth salicylate as radiopaque agentBiomaterials, 2006
- Properties of acrylic bone cements formulated with Bis‐GMAJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Injectable self-curing bioactive acrylic-glass composites charged with specific anti-inflammatory/analgesic agentBiomaterials, 2004
- Evaluation of the effect of seven acrylic bone cements on erythrocytes and plasmatic phase of coagulationBiomaterials, 2001
- Studies on radio-opaque polymeric biomaterials with potential applications to endovascular prosthesesBiomaterials, 1996
- Bone Injury Caused by Curing Bone CementClinical Orthopaedics and Related Research, 1984