Winkelstabile Verriegelung von Marknägeln mit dem Angular Stable Locking System® (ASLS)
Authors:
- 1 December 2011
- journal article
- clinical trial
- Published by Springer Nature in Operative Orthopädie und Traumatologie
- Vol. 23 (5) , 387-396
Abstract
Höhere Stabilität von Marknagelosteosynthesen durch winkelstabile Verriegelung zwischen Marknagel und Verriegelungsbolzen. Ein neuartiges Schrauben-Dübel-System (ASLS®, Synthes GmbH Oberdorf, Schweiz) wird dabei in übliche, kanülierte Nägel eingesetzt. Die Entscheidung kann intraoperativ erfolgen. Erweiterte Marknagelindikationen. Je kleiner und instabiler das zu verriegelnde Fragment ist, desto eher ist die Indikation zur winkelstabilen Verriegelung des proximalen und/oder distalen Fragments angezeigt. Femur-, Tibia- und Humersfrakturen, Marknagelosteosynthese im osteoporotischen Knochen sowie ante- und retrograd eingebrachte Nägel. Besonders bei retrograd eingebrachten Nägeln wird das Wackeln des Nagels im Schaftbereich nachhaltig abgestellt. Keine. Durchbohren mit dem ersten Bohrer, welcher die Stärke des Kerndurchmessers des Schraubenschafts hat. Aufbohren der zugewandten Kortikalis auf den Außendurchmesser der Hülse. Dann Aufstecken der Hülse auf die Spitze der Schraube. Die Schrauben-Hülsen-Kombination wird durch das größere zugewandte Loch vorgeschoben bis die mit der Hülse besetzte Schraubenspitze im Loch des Verriegelungsmarknagels sitzt. Vordrehen der Schraube. Das dann im Kerndurchmesser größer werdende Gewinde des Schraubenschafts expandiert die Hülse und führt zum winkelstabilen Formschluss. Die Schraube wird dann bis zum Aufsitzen des Schraubenkopfs auf der zugewandten Kortikalis vorgeschraubt. Das zugewandte erweiterte Loch wird mit dem erweiterten Anteil des Gewindeschafts unter dem Schraubenkopf besetzt. Die 1–3 notwendigen Gewindegänge werden durch die selbstschneidende Nut bei diesem Gewindesprung selbst geschnitten. Durch die winkelstabile Verriegelung kann nach bisheriger Erfahrung das Behandlungsregime nach Nagelung in Richtung frühere und/oder stärkere Teilbelastung oder frühere Vollbelastung erweitert werden. Ansonsten gelten die Richtlinien der Nachbehandlung bei Marknagelung. Die multizentrische Pilotstudie hat gezeigt, dass die Technik reproduzierbar und einfach ist. Komplikationen bei der Operationstechnik sind nicht aufgetreten. Biomechanische Laborstudien haben ergeben, dass die Stabilität bei axialer und drehender Belastung statisch und dynamisch deutlich höher ist als mit einer konventionellen Verriegelung. Versagenszustände treten später ein. Wie groß die klinischen Vorteile endgültig sind, werden weitere Anwendungen und die Ergebnisse einer derzeit laufenden prospektiv randomisierten Studie zeigen. Greater stability in intramedullary osteosynthesis using angle-stable fixation with intramedullary nails and proximal locking screws. A novel screw-and-sleeve system (ASLS®, Synthes GmbH, Oberdorf, Switzerland) is applied using normal cannulated nails. Decisions can be made intraoperatively. This technology widens the range of indications for intramedullary nailing: The smaller and less stable the fragment requiring fixation, the greater the indication for angular stable fixation of the proximal and/or distal fragment. Femoral, tibial and humeral fractures, intramedullary osteosynthesis in osteoporotic bone and ante- and retrograde nailing. Particularly in the case of retrograde nailing, sustained prevention of nail toggling is achieved. None. Drill with the first drill bit, which has the same core diameter as the screw shaft. Drill the cortex to the external diameter of the sleeve. Place the sleeve on the tip of the screw. The screw–sleeve combination is then advanced through the larger near hole until the sleeve-covered screw tip sits in the locking hole of the intramedullary fixation nail. Advance the screw. As the screw diameter becomes larger, the sleeve expands resulting in an angular stable locking effect. The screw is then advanced until the head of the screw sits on the exposed surface of the cortex. The hole is filled with the expanded part of the screw shaft beneath the screw head. The necessary 1–3 turns are cut by the self-tapping flute on the screw. According to experience to date, this form of angle-stable fixation enables earlier and/or greater partial mobilization or earlier full mobilization. In all other respects, the guidelines for aftercare in intramedullary nailing apply. A multi-center pilot study has shown the technique to be reproducible and simple. There have been no complications using this technique to date. Biomechanical laboratory studies have demonstrated that stability with respect to axial and torsional loading is statically and dynamically higher than with conventional nailing. Device failure occurs later. Further applications as well as results of a prospective randomised study currently under way will show how great the clinical advantages ultimately prove to be.Keywords
This publication has 7 references indexed in Scilit:
- Angle stable interlocking screws improve construct stability of intramedullary nailing of distal tibia fractures: A biomechanical studyInjury, 2009
- Angle Stable Locking Reduces Interfragmentary Movements and Promotes Healing After Unreamed NailingJournal of Bone and Joint Surgery, 2005
- Shear movement at the fracture site delays healing in a diaphyseal fracture modelJournal of Orthopaedic Research, 2003
- Interfragmentary movements in the early phase of healing in distraction and correction osteotomies stabilized with ring fixatorsLangenbeck's Archives of Surgery, 2003
- Mechanical boundary conditions of fracture healing: borderline indications in the treatment of unreamed tibial nailingJournal of Biomechanics, 2001
- Effects of Mechanical Factors on the Fracture Healing ProcessClinical Orthopaedics and Related Research, 1998
- Controlled Mechanical Stimulation in the Treatment of Tibial FracturesClinical Orthopaedics and Related Research, 1989