Crack Initiation Modes in Bilayered Alumina/Porcelain Disks as a Function of Core/Veneer Thickness Ratio and Supporting Substrate Stiffness
Authors:
- 1 June 2000
- journal article
- other
- Published by SAGE Publications in Journal of Dental Research
- Vol. 79 (6) , 1398-1404
Abstract
We hypothesize that the fracture resistance of alumina core/porcelain veneer disks increases and that crack initiation shifts from veneer to core as the core/veneer thickness ratio (tc/tv) increases from 0.5/1.0 to 1.3/0.2, or as the elastic modulus of the supporting substrate (Es) to which it is resin-bonded increases from 5.1 to 226 GPa. When supported by a low-modulus substrate, disks with low tc/tv ratios exhibited cracks in the veneer and within the core, while those with high tc/tv ratios demonstrated core cracks, but not veneer cracks. None of the disks supported by Ni-Cr alloy (E = 226 GPa) exhibited core cracks. These results support the hypothesis that the crack initiation site shifts as the tc/t v ratio increases, but the increase in Es did not affect the crack initiation site. This study suggests that the tc/tv ratio is the dominant factor that controls the failure initiation site in bilayered ceramic disks.Keywords
This publication has 5 references indexed in Scilit:
- Stress distribution in ceramic crown forms as a function of thickness, elastic modulus, and supporting substrate2002
- Crack Suppression in Strongly Bonded Homogeneous/Heterogeneous Laminates: A Study on Glass/Glass‐Ceramic BilayersJournal of the American Ceramic Society, 1996
- Failure of All-ceramic Fixed Partial Dentures in vitro and in vivo: Analysis and ModelingJournal of Dental Research, 1995
- Moduli of rupture of layered dental ceramicsDental Materials, 1994
- A comparative strength study of metal ceramic and all-ceramic esthetic materials: Modulus of ruptureThe Journal of Prosthetic Dentistry, 1989