Novel Adsorbent Based on Banana Peel Waste for Removal of Heavy Metal Ions from Synthetic Solutions
Authors:
- Mihai NegroiuMNMihai Negroiu
- Anca Andreea ȚurcanuAȚAnca Andreea Țurcanu
- Ecaterina MateiEcaterina Matei
- Maria RâpăMaria Râpă
- Cristina Ileana CovaliuCristina Ileana Covaliu
- Andra Mihaela PredescuAndra Mihaela Predescu
- Cristian Mircea PantilimonCPCristian Mircea Pantilimon
- George ComanGCGeorge Coman
- Cristian PredescuCPCristian Predescu
Open Access
Abstract
Due to its valuable compounds, food waste has been gaining attention in different applications, such as life quality and environment. Combined with circular economy requirements, a valorization method for waste, especially banana waste, was to convert them into adsorbents with advanced properties. The banana waste, after thermal treatment, was used with high removal performances (100%) for the removal of heavy metals, such as Cr, Cu, Pb, and Zn, but their small particle size makes them very hard to recover and reuse. For this reason, a biopolymeric matrix was used to incorporate the banana waste. The matrix was chosen for its remarkable properties, such as low cost, biodegradability, low carbon footprint, and reduced environmental impact. In this research, different types of materials (simple banana peel ash BPA and combined with biopolymeric matrix, ALG–BPA, CS–BPA) were prepared, characterized, and tested. The materials were characterized by means of attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), optical microscopy (OM), scanning electron microscopy (SEM), and tested for the removal of metal ions from synthetic solutions using atomic absorption spectroscopy (AAS). The ALG–BPA material proved to be the most efficient in the removal of heavy metal ions from synthetic solution, reaching even 100% metal removal for Cr, Fe, Pb, and Zn, while the CS-based materials were the least efficient, presenting the best values for Cr and Fe ions with a removal efficiency of 34.14% and 28.38%, respectively. By adding BPA to CS, the adsorption properties of the material were slightly improved, but also only for Cr and Fe ions, to 37.09% and 57.78%.Keywords
This publication has 42 references indexed in Scilit:
- Adsorption of Cd(II) and Pb(II) by a novel EGTA-modified chitosan material: Kinetics and isothermsJournal of Colloid and Interface Science, 2013
- Microfluidic wet spinning of chitosan-alginate microfibers and encapsulation of HepG2 cells in fibersBiomicrofluidics, 2011
- Sorption equilibrium of Cr(VI) ions on oak wood charcoal (Carbo Ligni) and charcoal ash as low-cost adsorbentsFuel Processing Technology, 2011
- Kinetic analysis of metal uptake by dry and gel alginate particlesBiochemical Engineering Journal, 2009
- Ion-exchange equilibria of Ni2+, Co2+, Mn2+ and Mg2+ with iminodiacetic acid chelating resin Amberlite IRC 748Hydrometallurgy, 2009
- Adsorption of Cu(II) ions in aqueous solution using chitosan beads, chitosan–GLA beads and chitosan–alginate beadsChemical Engineering Journal, 2008
- Modified chitosan and calcium alginate biopolymer sorbents for removal of nickel (II) through adsorptionCarbohydrate Polymers, 2008
- Removal of iron from groundwater by ash: A systematic study of a traditional methodJournal of Hazardous Materials, 2007
- Modification of Sodium Alginate for the Removal of Cd(II) from Aqueous SolutionsPolymer-Plastics Technology and Engineering, 2006
- Removal of heavy metal ions from water by cross-linked carboxymethyl corn starchCarbohydrate Polymers, 1999