An Underactuated Robotic Arm Based on Differential Gears for Capturing Moving Targets: Analysis and Design
Authors:
- 16 March 2016
- journal article
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 8 (4) , 041012
Abstract
This paper presents the design of an underactuated robotic arm for capturing moving targets with an impact-absorbing capability. The arm consists of three joints (a base joint (BJ), a medial joint (MJ), and a distal joint (DJ)) that are driven by two actuators. A one-input dual-output planetary gear (PG) system, in which neither the ring gear nor the planetary carrier is fixed, is employed to distribute the driving torque between the MJ and DJ. As is well known, an underactuated arm may exhibit unstable grasping performance such that the arm loses contact with the target in certain grasping postures. Therefore, a method is presented for analyzing the equilibrium contact force and the relative movement trend between the target and the arm to determine the work space in which stable grasping is possible. The structural configuration parameters, such as the length ratios among the three beams and the reduction ratio of the PG system, were optimized to maximize the grasp stability work space. Subsequently, a prototype was designed and fabricated based on these optimized parameters. Experiments indicate that this arm design can effectively reduce the peak torque on the joints when grasping a moving target.Keywords
This publication has 30 references indexed in Scilit:
- The hand of the DLR Hand Arm System: Designed for interactionThe International Journal of Robotics Research, 2012
- Joint coupling design of underactuated hands for unstructured environmentsThe International Journal of Robotics Research, 2011
- Strategy for capturing of a tumbling space debrisActa Astronautica, 2011
- The Highly Adaptive SDM Hand: Design and Performance EvaluationThe International Journal of Robotics Research, 2010
- Manipulation with a polyarticulated mechanical hand: a new efficient real-time method for computing fingertip forces for a global manipulation strategyRobotica, 2005
- The development of a novel prosthetic hand-ongoing research and preliminary resultsIEEE/ASME Transactions on Mechatronics, 2002
- Robonaut: NASA's space humanoidIEEE Intelligent Systems and their Applications, 2000
- A Mechanism for Dexterous End-Effector Placement During Minimally Invasive SurgeryJournal of Mechanical Design, 1999
- The UTAH/M.I.T. Dextrous Hand: Work in ProgressThe International Journal of Robotics Research, 1984
- The development of soft gripper for the versatile robot handMechanism and Machine Theory, 1978