Quantification of the Effectiveness of Various Adhesives in Holding an SMA Actuator Wire During Joule Heating
Authors:
- 10 January 2013
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 89 (4) , 301-322
Abstract
Shape memory alloy (SMA) actuator wires undergo a large contraction (∼4%) and resistance change (∼7%) in response to a material phase change induced by heating. However, a major impediment to using SMA wires as embedded actuators or sensors in practical applications is the challenge of attaching the small wires to the surrounding structure without adding significant bulk to the system. This work systematically determines the bond strength of different adhesives that could be used to attach small (<100-µm diameter) SMA wires to a structure by exposing the adhesive bond to the thermal and mechanical loading expected during typical embedded SMA applications. Results show that for all adhesives tested, bonding strength is reduced as heating current is increased; however, some two-part epoxies and contact adhesives are still able to maintain 6 MPa of bonding strength to a heated SMA wire. This number can be used to determine how much adhesive is needed to hold different diameter wires for a range of applications.Keywords
This publication has 21 references indexed in Scilit:
- A new methodology for targeting drug-aerosols in the human respiratory systemInternational Journal of Heat and Mass Transfer, 2008
- Modeling the dynamic behavior of a shape memory alloy actuated catheterSmart Materials and Structures, 2008
- A Study on Anthropomorphic Robot Hand Simulation Driven by SMA Wire Using Segment ControlKey Engineering Materials, 2007
- Improved adhesion between nickel–titanium shape memory alloy and a polymer matrix via silane coupling agentsComposites Part A: Applied Science and Manufacturing, 2004
- Adhesion of epoxy/glass fibre composites influenced by aging effects on sizingsComposites Part A: Applied Science and Manufacturing, 2004
- Tubular Adhesive Joints Under Axial LoadJournal of Applied Mechanics, 2003
- Bond strength measurement between glass fibres and epoxy resin at elevated temperatures using the pull-out and push-out techniquesThe Journal of Adhesion, 2002
- Experimental results of a pull-out test performed with single- and multi-fiber samplesThe Journal of Adhesion, 2002
- In-flight tracking of helicopter rotor blades using shape memory alloy actuatorsSmart Materials and Structures, 2001
- Thermomechanical Response of Shape Memory CompositesJournal of Intelligent Material Systems and Structures, 1994