Influence of Material Properties on Interfacial Morphology during Magnetic Pulse Welding of Al1100 to Copper Alloys and Commercially Pure Titanium
Open Access
- 18 June 2021
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 5 (2) , 64
Abstract
During magnetic pulsed welding (MPW), a wavy interface pattern can be observed. However, this depends on the specific material combination being joined. Some combinations, e.g., steel to aluminum, simply provide undulating waves, while others, e.g., titanium to copper, provide elegant vortices. These physical features can affect the strength of the joint produced, and thus a more comprehensive understanding of the material combination effects during MPW is required. To investigate the interfacial morphology and parent material properties dependency during MPW, tubular Al1100 and various copper alloy joints were fabricated. The influence of two material properties, i.e., yield strength and density, were studied, and the interface morphology features were visually investigated. Results showed that both material properties affected the interface morphology. Explicitly, decreasing yield strength (Cu101 and Cu110) led to a wavy interface, and decreasing density (Cu110 and CP-Ti) resulted in a wave interface with a larger wavelength. Numerical analyses were also conducted in LS-DYNA and validated the interface morphologies observed experimentally. These simulations show that the effect on shear stresses in the material is the cause of the interface morphology variations obtained. The results from this research provide a better fundamental understanding of MPW phenomena with respect to the effect of material properties and thus how to design an effective MPW application.Keywords
Funding Information
- National Science Foundation (1537471)
This publication has 16 references indexed in Scilit:
- Depiction of interfacial morphology in impact welded Ti/Cu bimetallic systems using smoothed particle hydrodynamicsApplied Physics Letters, 2017
- A study on the critical wall thickness of the inner tube for magnetic pulse welding of tubular Al–Fe partsJournal of Materials Processing Technology, 2016
- Accessing collision welding process window for titanium/copper welds with vaporizing foil actuators and grooved targetsJournal of Materials Processing Technology, 2014
- Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically Assisted DeformationJournal of Engineering Materials and Technology, 2013
- Mechanical property and microstructure of aluminum alloy-steel tubes joint by magnetic pulse weldingMaterials Science and Engineering: A, 2013
- Efficient welding conditions in magnetic pulse welding processJournal of Manufacturing Processes, 2012
- Effects of radial inertia and end friction in specimen geometry in split Hopkinson pressure bar tests: A computational studyMechanics of Materials, 2012
- Wave formation mechanism in magnetic pulse weldingInternational Journal of Impact Engineering, 2010
- Effect of field shaper on magnetic pressure in electromagnetic formingJournal of Materials Processing Technology, 2005
- The effect of grain size on the high-strain, high-strain-rate behavior of copperMetallurgical and Materials Transactions A, 1995