Enhanced high-voltage cycling stability of Ni-rich cathode materials via the self-assembly of Mn-rich shells
- 8 August 2019
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (35) , 20262-20273
Abstract
Ni-rich layered LiNi1−x−yMnxCoyO2 (NMC, x + y < 0.5) oxides have been demonstrated to be promising cathode materials for high-energy lithium-ion batteries. However, when cycled at high voltages, NMC cathode materials with high Ni content usually show unsatisfactory capacity decay and voltage fading due to side reactions and electrochemical irreversibility during prolonged lithiation/delithiation cycles. Here, we report a Mn-rich Li0.65Mn0.59Ni0.12Co0.13Oδ (LMNCO) material that consists of layered Li2MnO3 and spinel LiMn1.5Ni0.5O4-type components. LMNCO is a desirable shell material for improving the high-voltage cycling stability of Ni-rich LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode materials. Core–shell-structured NMC811@x% LMNCO materials were fabricated with satisfactory structural conformality via sonofragmentation followed by solvent evaporation-induced self-assembly and post-annealing processes. The optimized NMC811@5% LMNCO cathode material can deliver an initial discharge capacity of 150.0 mA h g−1 at 5C (1C = 200 mA g−1) in a voltage range of 2.7–4.6 V vs. Li+/Li with 83.4% retention for up to 500 cycles, significantly superior to that of the bare NMC811 material (75.6%). The Mn-rich shell also enables the effective stabilization of the Ni-rich cathode materials for long-term cycling at high voltages and 55 °C. In addition, this work offers a synthetic prototype for the fabrication of conformal core–shell-structures, which could be adopted for the surface modification of various functional materials to achieve enhanced performance in device applications.Keywords
Funding Information
- National Natural Science Foundation of China (21703147)
This publication has 48 references indexed in Scilit:
- Surface and Interface Engineering of Electrode Materials for Lithium‐Ion BatteriesAdvanced Materials, 2014
- A high-energy, full concentration-gradient cathode material with excellent cycle and thermal stability for lithium ion batteriesJournal of Materials Chemistry A, 2014
- Effect of temperature on lithium-ion intercalation kinetics of LiMn1.5Ni0.5O4-positive-electrode materialIonics, 2013
- Spinel/Layered Heterostructured Cathode Material for High‐Capacity and High‐Rate Li‐Ion BatteriesAdvanced Materials, 2013
- Spinel‐Layered Core‐Shell Cathode Materials for Li‐Ion BatteriesAdvanced Energy Materials, 2011
- Interfacing electrolytes with electrodes in Li ion batteriesJournal of Materials Chemistry, 2011
- Surface modification of LiNi0.5Mn1.5O4 by ZrP2O7 and ZrO2 for lithium-ion batteriesJournal of Power Sources, 2010
- An overview of positive-electrode materials for advanced lithium-ion batteriesJournal of Power Sources, 2007
- Synthesis and Characterization of Li[(Ni0.8Co0.1Mn0.1)0.8(Ni0.5Mn0.5)0.2]O2 with the Microscale Core−Shell Structure as the Positive Electrode Material for Lithium BatteriesJournal of the American Chemical Society, 2005
- Impedance of a Single Intercalation Particle and of Non-Homogeneous, Multilayered Porous Composite Electrodes for Li-ion BatteriesThe Journal of Physical Chemistry B, 2004