Experimental Investigation on Conduction-Cooled Fast-Ramping Layer-Wound (RE)BCO Superconducting Magnet for Magnetic Refrigeration
Authors:
- 31 October 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 25 (3) , 1-5
Abstract
Magnetic refrigeration requires a strong magnetic field and its alternation for the magnetization and demagnetization processes. A conduction-cooled (RE)BCO coil was designed and fabricated to exert the maximum central magnetic field of 3.5 T with a field homogeneity of 90% on the magnetic refrigerant bed for an adiabatic demagnetization refrigerator (ADR) operating between 22 and 20 K. The polyimide tape insulated (RE)BCO tape conductor was wound on the stainless steel bobbin with standard layer-wound method whose outer diameter and thickness were 25.4 and 0.3 mm, respectively. The fast-ramping (RE)BCO coil was conductively cooled by a GM cryocooler to approximately 20 K. The (RE)BCO coil winding has a novel thermal drain structure to withstand the high thermal loads during alternating current (AC) operation which consists of high purity copper strip arrays installed between the inter-layers of the coil winding. Alternating magnetic field was stably generated with the peak of 3.0 T at the current of 130 A (10.5 A s -1 ). In this paper, the technical issues regarding to the fast-ramping conduction-cooled (RE) BCO coil itself and the integrated operation with the magnetic refrigeration system are discussed.Keywords
Funding Information
- Converging Research Center Program through the Ministry of Science
- ICT, and Future Planning, Korea
This publication has 19 references indexed in Scilit:
- Heat switches for ADRsCryogenics, 2014
- Remarkable weakness against cleavage stress for YBCO-coated conductors and its effect on the YBCO coil performancePhysica C: Superconductivity and its Applications, 2011
- High Temperature Superconducting Motor Cooled by On-Board CryocoolerIEEE Transactions on Applied Superconductivity, 2010
- Degradation of the performance of a YBCO-coated conductor double pancake coil due to epoxy impregnationPhysica C: Superconductivity and its Applications, 2010
- High-Temperature Superconducting Magnets for NMR and MRI: R&D Activities at the MIT Francis Bitter Magnet LaboratoryIEEE Transactions on Applied Superconductivity, 2010
- Gas gap thermal switches using neon or hydrogen and sorption pumpVacuum, 2009
- Helium Liquid- and Gas-Gap Heat Switches for Applications at 2 K1994
- Carnot magnetic refrigerator operating between 1.4 and 10 KCryogenics, 1993
- Thermodynamic analysis of a magnetic refrigerator with static heat switchesCryogenics, 1986
- Double acting reciprocating magnetic refrigerator: first experimentsCryogenics, 1981