Low-damage interface enhancement-mode AlN/GaN high electron mobility transistors with 41.6% PAE at 30 GHz

Authors:
  • SISi-Yu思雨Liu刘
    Si-Yu思雨Liu刘
  • JIJie-Jie杰杰Zhu祝
    Jie-Jie杰杰Zhu祝
  • JIJing-Shu静姝Guo郭
    Jing-Shu静姝Guo郭
  • KAKai凯Cheng程
    Kai凯Cheng程
  • MIMin-Han珉瀚Mi宓
    Min-Han珉瀚Mi宓
  • LILing-Jie灵洁Qin秦
    Ling-Jie灵洁Qin秦
  • BOBo-Wen博文Zhang张
    Bo-Wen博文Zhang张
  • MIMin旻Tang唐
    Min旻Tang唐
  • XIXiao-Hua晓华Ma马
    Xiao-Hua晓华Ma马

Abstract
This paper reports a low-damage interface treatment process for AlN/GaN high electron mobility transistor (HEMT) and demonstrates the excellent power characteristics of radio-frequency (RF) enhancementmode (E-mode) AlN/GaN HEMT. An RF E-mode device with 2.9-nm-thick AlN barrier layer fabricated by remote plasma oxidation (RPO) treatment at 300 °C. The device with a gate length of 0.12-μm has a threshold voltage (V th) of 0.5 V, a maximum saturation current of 1.16 A/mm, a high I on/I off ratio of 1 × 108, and a 440-mS/mm peak transconductance. During continuous wave (CW) power testing, the device demonstrates that at 3.6 GHz, a power added efficiency is 61.9% and a power density is 1.38 W/mm, and at 30 GHz, a power added efficiency is 41.6% and a power density is 0.85 W/mm. Furthermore, the RPO treatment improves the mobility of RF E-mode AlN/GaN HEMT. All results show that the RPO processing method has good applicability to scaling ultrathin barrier E-mode AlN/GaN HEMT for 5G compliable frequency ranging from sub-6 GHz to Ka-band.

This publication has 24 references indexed in Scilit: