Electrochemical Protection of Zirconium in Oxidizing Hydrochloric Acid Solutions
Authors:
- 1 June 1984
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 40 (6) , 289-296
Abstract
An electrochemical protection technique using cathodic polarization to maintain zirconium below its critical repassivation potential was used to avoid pitting and stress corrosion cracking (SCC) in hydrochloric acid (HCl) containing ferric ions (Fe+3). Corrosion and pit penetration rates are reported for pickled, abraded, and as-received surface conditions in 10, 20, and 37% HCl containing 50, 100, or 500 ppm Fe+3 at temperatures to boiling. The pickled surface was the least susceptible to pitting in the 64 day tests. Electrochemical protection is then evaluated for total immersion, partial immersion, U-bend, and constant strain rate tensile tests. Protection is effective in eliminating pitting and SCC in 10 and 20% HCl containing Fe+3.Keywords
This publication has 6 references indexed in Scilit:
- Stress Corrosion Cracking of Zircaloy-2 in Neutral Aqueous Chloride Solutions at 25 CCorrosion, 1973
- Corrosion Tests at Elevated Temperatures and PressuresCorrosion, 1963
- Corrosion and electrochemical properties of zirconium, titanium and titanium‐zirconium alloys in solutions of hydrochloric acid and of hydrochloric acid with oxidising agentsJournal of Chemical Technology & Biotechnology, 1961
- Intergranular Corrosion Of Commercially Pure ZirconiumCorrosion, 1961
- The Corrosion of Zirconium In Hydrochloric Acid at Atmospheric PressureCorrosion, 1959
- Corrosion Resistance of Titanium, Zirconium, and Stainless SteelIndustrial & Engineering Chemistry, 1952