Heatpulse annealing of ion-implanted silicon: structural characterization by transmission electron microscopy
Authors:
- D K SadanaDSD K Sadana
- S C ShatasSSS C Shatas
- A GatAGA Gat
- 25 November 2020
- book chapter
- Published by Taylor & Francis
- p. 143-148
Abstract
A detailed structural investigation of Heatpulse rapid thermal annealed ion-implanted Si was carried out using TEM. Defect-free material was obtained after an 1100°C/10 sec. anneal for 80 KeV 2×1015 75As implanted Si, while dislocation loops were still present after lower temperature anneals. When compared with arsenic, 35 KeV 11B implanted Si in the dose range 5×1014 exhibited markedly different behavior under the same annealing conditions, in that residual defects in the form of line dislocations, loops, and rods were observed. Comparison with 1000°C/30 min. furnace annealed samples showed differences in defect structures and impurity redistribution behavior as revealed by SIMS measurements. A model explaining the annealing behavior of implanted layers in silicon under rapid annealing conditions is proposed.Keywords
This publication has 1 reference indexed in Scilit:
- Heat-pulse annealing of arsenic-implanted silicon with a CW arc lampIEEE Electron Device Letters, 1981