Contribution of Twins to the Strengthening of Commercial Purity Titanium after Equal-Channel Angular Pressing
- 30 December 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 667-669, 719-724
Abstract
Room temperature equal-channel angular pressing (ECAP) was employed on commercial purity titanium in the present work. Mechanical twining was observed in ~90% grains while the grains were not significantly refined (~10 μm) after ECAP. TEM observations showed that the twins observed under OM are usually composed of a serial of parallel twin bands with a width of ~1 μm. Microhardness and tensile tests showed that such a coarse-grained microstructure combined with a high fraction of mechanical twins has a microhardness of ~ 240 Hv, yield strength of ~ 730 MPa, tensile strength of ~ 740 MPa and elongation to failure of ~ 16%. This yield strength is much higher than 620-640 MPa, the yield strength of ultrafine-grained titanium by 8~12 passes of ECAP at 450 oC with a grain size of 200-300 nm, and is close to ~ 790 MPa, the yield strength of commercial Ti-6Al-4V alloys.Keywords
This publication has 23 references indexed in Scilit:
- Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressingActa Materialia, 2009
- Principles of equal-channel angular pressing as a processing tool for grain refinementProgress in Materials Science, 2006
- Severe plastic deformation (SPD) of titanium at near-ambient temperatureActa Materialia, 2006
- An analysis of the strain hardening behavior of ultra-fine grain pure titaniumScripta Materialia, 2006
- The interaction mechanism of screw dislocations with coherent twin boundaries in different face-centred cubic metalsScripta Materialia, 2006
- Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passesActa Materialia, 2004
- Deformation twins in pure titanium processed by equal channel angular pressingScripta Materialia, 2003
- Deformation structures of pure Ti produced by equal channel angular pressingScripta Materialia, 2001
- Influence of ECAP routes on the microstructure and properties of pure TiMaterials Science and Engineering: A, 2001
- Principle of equal-channel angular pressing for the processing of ultra-fine grained materialsScripta Materialia, 1996