A gate drive circuit with mid-level voltage for GaN transistors in a 7-MHz isolated resonant converter
Authors:
- 1 March 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 731-736
Abstract
This paper analyzes the drive requirements of Gallium Nitride (GaN) power transistors as the control FETs in the resonant converters in the range of multi-megahertz. In resonant converters with multi-MHz, ZVS technique is normally used to reduce the high frequency switching loss. The commercial gate drivers for the GaN transistors focus on high reliability to the precise gate drive voltage against the parasitic components. But they do not consider the high reverse conduct voltage of the GaN transistors as the control FETs under ZVS at high frequency. To reduce the high reverse conduction loss of the GaN power transistors due to the reverse conduction mechanism before ZVS turn-on, in the meanwhile, ensure the high stability and reliability, a new driving scheme with the mid-level voltage is proposed. In addition, the proposed drive circuit is applied to an isolated resonant DC-DC converter with 7 MHz. The prototype of 18 V input and 5 V/ 2 A output was built to verify the functionality and the benefits.Keywords
This publication has 7 references indexed in Scilit:
- A 30-W flyback converter operating at 5 MHz2014
- Experience with 1 to 3 megahertz power conversion using eGaN FETs2013
- Three-level driving method for GaN power transistor in synchronous buck converter2012
- A 25.6 W 13.56 MHz wireless power transfer system with a 94% efficiency GaN Class-E power amplifier2012
- Optimization of the drive circuit for enhancement mode power GaN FETs in DC-DC converters2012
- Very-High-Frequency Resonant Boost ConvertersIEEE Transactions on Power Electronics, 2009
- A High-Frequency Resonant Inverter Topology With Low-Voltage StressIEEE Transactions on Power Electronics, 2008