EFFECT OF GRAPHITE POWDER ADDITIVES ON MECHANICAL PROPERTIES AND ELECTRICAL CONDUCTIVITY IN BLAST FURNACE SLAG-BASED ALKALI-ACTIVATED MORTARS
Open Access
- 28 September 2023
- journal article
- research article
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 11 (3) , 1120-1130
Abstract
In this study, the effect of graphite powder additive on mechanical properties and electrical conductivity of alkali-activated mortar samples produced using blast furnace slag was investigated. In the preparation of the mortar samples, graphite powder in (75) micron size was substituted at a rate of 0%-0.5-1%, 2% and 4% by weight of the binder. Sodium hydroxide and sodium silicate were used as activators in the mortar samples produced with Blast Furnace slag, and the samples were thermal cured at 110⁰C for 24 hours. Workability, unit weight, electrical conductivity, tendencies and compressive strength of all mortar samples that completed the curing period were determined. In addition, experiments were carried out to determine the water absorption and void ratios of the samples that gave the best results in the cementitious system activated with alkalis. The results obtained showed that the workability of the graphite powder was improved at 1% reinforcement rate in the mortar samples activated with alkalis, and it had a negative effect at the rates above 1%. It was understood that 1% graphite powder additive contributed positively to flexural and compressive strengths, while 4% graphite powder additive contributed provided the highest electrical conductivity.Keywords
This publication has 25 references indexed in Scilit:
- Light-weight cementitious conductive anode for impressed current cathodic protection of steel reinforced concrete applicationConstruction and Building Materials, 2014
- Enhancement of the durability characteristics of concrete nanocomposite pipes with modified graphite nanoplateletsConstruction and Building Materials, 2013
- Electrical conductivity of setting cement paste with different mineral admixturesConstruction and Building Materials, 2012
- DC electrical conductivity of carbon black polymer composites at low temperaturesJournal of Non-Crystalline Solids, 2011
- The CO2 abatement cost curve for the Thailand cement industryJournal of Cleaner Production, 2010
- Environmental impact of cement production: detail of the different processes and cement plant variability evaluationJournal of Cleaner Production, 2010
- Cement grinding optimisationMinerals Engineering, 2004
- Overlay current in a conductive concrete snow melting systemCement and Concrete Research, 2003
- Electrical conductivity and rheological properties of ordinary Portland cement–silica fume and calcium hydroxide–silica fume pastesCement and Concrete Research, 2002
- Electrical conductivity, diffusion, and permeability of Portland cement-based mortarsCement and Concrete Research, 2000