A Facile Preparation of Ambient Pressure–Dried Hydrophilic Silica Aerogels and Their Application in Aqueous Dye Removal
Authors:
Open Access
- 10 June 2020
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 7
Abstract
Highly porous hydrophilic silica aerogels (SAs) are potentially excellent adsorbents in aqueous media, which are generally synthesized via a standard sol–gel method followed by the relatively complex and specialized high pressure–requiring supercritical fluid drying process. Herein, a facile and novel synthetic method applying ambient pressure–drying technology for the rapid preparation of hydrophilic SAs is reported, and they are simply soaked with metal cation solutions without the need of traditional surface modification or supercritical fluid drying process. Chemical and physical properties of the hydrophilic SAs were characterized and compared with a trimethylchlorosilane (TMCS)-modified hydrophobic silica aerogel. In addition to the integrity and low shrinkage of the as-prepared products, Fourier transform infrared (FTIR) spectra and integrated thermal analyzer (ITA) results revealed the presence of hydroxyl groups as well as the absence of multitudinous hydrophobic groups on the silica surface after soaking. Field emission scanning electron microscope (FE-SEM) and Brunauer–Emmett–Teller (BET) measurements confirmed the mesopores inside the aerogel skeleton. Among the tested metal cations, the Mg2+-soaked SAs demonstrated the best pore properties (pore diameter 9.35 nm and pore volume 1.09 cc/g), and the Fe3+-soaked ones got the biggest surface area (855.62 m2/g) in contrast to other metal cations. Rhodamine B and Methylene blue solutions are used to check the absorption ability of the SAs in aqueous media, in which the best adsorption capacity for Rhodamine B and Methylene blue reached 2.8 and 40.4 mg/g, respectively, implying their potential application in aqueous pollutant removal.Keywords
This publication has 42 references indexed in Scilit:
- Low-density TEOS-based silica aerogels prepared at ambient pressure using isopropanol as the preparative solventJournal of Alloys and Compounds, 2009
- Adsorption of Copper Ions and Methylene Blue in a Single and Binary System on Wheat StrawJournal of Chemical & Engineering Data, 2009
- Spongy chalcogels of non-platinum metals act as effective hydrodesulfurization catalystsNature Chemistry, 2009
- Synthesis and characterization by FTIR spectroscopy of silica aerogels prepared using several Si(OR)4 and R′′Si(OR′)3 precursorsJournal of Molecular Structure, 2009
- Optimization of instantaneous solvent exchange/surface modification process for ambient synthesis of monolithic silica aerogelsJournal of Colloid and Interface Science, 2008
- Silica aerogel; synthesis, properties and characterizationJournal of Materials Processing Technology, 2008
- High specific surface area TEOS-based aerogels with large pore volume prepared at an ambient pressureApplied Surface Science, 2007
- Hydrophobic and physical properties of the ambient pressure dried silica aerogels with sodium silicate precursor using various surface modification agentsApplied Surface Science, 2007
- Removal of reactive dyes from wastewater by adsorption on coir pith activated carbonBioresource Technology, 2006
- Influence of N,N-dimethylformamide additive on the physical properties of citric acid catalyzed TEOS silica aerogelsMaterials Chemistry and Physics, 1999