Tensile properties and stress whitening of polypropylene/polyolefin elastomer/magnesium hydroxide flame retardant composites for cable insulating application
Authors:
- 28 June 2005
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 97 (6) , 2311-2318
Abstract
Flame retardant polypropylene (PP) composites were prepared by combining random polypropylene with uncoated and surface‐treated forms of magnesium hydroxide filler and elastomeric modifiers, with and without maleic anhydride functionalization. Four types of magnesium hydroxide (MDH) with different surface treatments were compounded at amounts up to 60% by weight to PP/polyolefin elastomer (POE) matrix resin to obtain a series of composites. The tensile strength and elongation at break were measured. MDH coated with polymeric material was found to give a high elongation at break value compared with the values obtained with uncoated and vinyl silane and amino silane coated MDH. Two types of POE, i.e., neat and maleic anhydride grafted POE (POEgMA), were used to investigate the stress whitening of composites in bending deformation. POEgMA used composites showed no stress whitening while neat POE used composites showed whitening when bended. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2311–2318, 2005Keywords
This publication has 15 references indexed in Scilit:
- Behavior of poly(ethylene‐co‐olefin) polymers as elastomeric materialsJournal of Applied Polymer Science, 2004
- Flame retardant and mechanical properties of natural fibre–PP composites containing magnesium hydroxidePolymer Degradation and Stability, 2004
- Effect of composition and comonomer type on the rheology, morphology and properties of ethylene-α-olefin copolymer/polypropylene blendsPolymer, 2003
- Discolouration of polypropylene-based compounds containing magnesium hydroxidePolymer Degradation and Stability, 2002
- Adhesion of ethylene–octene copolymers to polypropylene: Interfacial structure and mechanical propertiesJournal of Adhesion Science and Technology, 2001
- Rheological and thermal properties of binary blends of polypropylene and poly(ethylene-CO-1-octene)Journal of Applied Polymer Science, 2000
- Rheological, mechanical, thermal, and morphological properties of polypropylene/ethylene-octene copolymer blendsJournal of Applied Polymer Science, 2000
- Low-rate fracture behaviour of magnesium hydroxide filled polypropylene block copolymerPolymer Bulletin, 1998
- The effects of short-chain branching and comonomer type on the interfacial tension of polypropylene-polyolefin elastomer blendsJournal of Applied Polymer Science, 1997
- Flame retardant effects of magnesium hydroxidePolymer Degradation and Stability, 1996