Performance of a newly designed continuous soot monitoring system (COSMOS)
- 29 August 2008
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Environmental Monitoring
- Vol. 10 (10) , 1195-1201
Abstract
We designed a continuous soot monitoring system (COSMOS) for fully automated, high-sensitivity, continuous measurement of light absorption by black carbon (BC) aerosols. The instrument monitors changes in transmittance across an automatically advancing quartz fiber filter tape using an LED at a 565 nm wavelength. To achieve measurements with high sensitivity and a lower detectable light absorption coefficient, COSMOS uses a double-convex lens and optical bundle pipes to maintain high light intensity and signal data are obtained at 1000 Hz. In addition, sampling flow rate and optical unit temperature are actively controlled. The inlet line for COSMOS is heated to 400 °C to effectively volatilize non-refractory aerosol components that are internally mixed with BC. In its current form, COSMOS provides BC light absorption measurements with a detection limit of 0.45 Mm−1 (0.045 µg m−3 for soot) for 10 min. The unit-to-unit variability is estimated to be within ±1%, demonstrating its high reproducibility. The absorption coefficients determined by COSMOS agreed with those by a particle soot absorption photometer (PSAP) to within 1% (r2 = 0.97). The precision (±0.60 Mm−1) for 10 min integrated data was better than that of PSAP and an aethalometer under our operating conditions. These results showed that COSMOS achieved both an improved detection limit and higher precision for the filter-based light absorption measurements of BC compared to the existing methods.Keywords
This publication has 18 references indexed in Scilit:
- An Inter-Comparison of Two Black Carbon Aerosol Instruments and a Semi-Continuous Elemental Carbon Instrument in the Urban EnvironmentAerosol Science and Technology, 2007
- Size distributions and mixtures of dust and black carbon aerosol in Asian outflow: Physiochemistry and optical propertiesJournal of Geophysical Research: Atmospheres, 2004
- Absorption of light by soot particles: determination of the absorption coefficient by means of aethalometersJournal of Aerosol Science, 2003
- Photoacoustic and filter‐based ambient aerosol light absorption measurements: Instrument comparisons and the role of relative humidityJournal of Geophysical Research: Atmospheres, 2003
- Diagnosing black carbon trends in large urban areas using carbon monoxide measurementsJournal of Geophysical Research: Atmospheres, 2002
- Photoacoustic spectrometer for measuring light absorption by aerosol: instrument descriptionAtmospheric Environment, 1999
- Calibration and Intercomparison of Filter-Based Measurements of Visible Light Absorption by AerosolsAerosol Science and Technology, 1999
- Elemental Carbon-Based Method for Monitoring Occupational Exposures to Particulate Diesel ExhaustAerosol Science and Technology, 1996
- Optical and thermal measurements of black carbon aerosol content in different environments: Variation of the specific attenuation cross-section, sigma (σ)Atmospheric Environment. Part A. General Topics, 1993
- Atmospheric light absorption—A reviewAtmospheric Environment. Part A. General Topics, 1993