A FDEM Parametric Investigation on the Impact Fracture of Monolithic Glass
Open Access
Abstract
Due to the brittleness, monolithic glass may fracture under impact, resulting in catastrophic sequences. The combined finite-discrete element method, i.e., FDEM, is employed to investigate both the oblique and the perpendicular impact failures of monolithic glass parametrically, particularly the soda-lime glass. Using FDEM, glass is discretised into discrete elements where a finite element formulation is incorporated, leading to accurate evaluation of the contact forces and structural deformation. Following the basic theories of the FDEM, a cohesive Mode I fracture model of glass is briefly introduced. Numerical examples are given for the verification of the employed fracture model and the applicability of the FDEM, and comparisons have been made against the computational and experimental results in the literature. The investigated parameters include the impact velocity, the impact angle, the material properties of glass, etc. The obtained results not only revealed the impact fracture mechanism of soda-lime glass but also provided guidance for its design and manufacturing.Keywords
Funding Information
- National Natural Science Foundation of China (51808368)
- Qinglan Project of Jiangsu Province of China (None)
- Postgraduate Research & Practice Innovation Program of Jiangsu Province (SJCX20_1096)
This publication has 43 references indexed in Scilit:
- A simple ballistic material model for soda-lime glassInternational Journal of Impact Engineering, 2009
- Investigation of impact fracture behavior of automobile laminated glass by 3D discrete element methodComputational Mechanics, 2007
- Modeling of Stone-impact Resistance of Monolithic Glass Ply Using Continuum Damage MechanicsInternational Journal of Damage Mechanics, 2005
- Mesh size sensitivity of the combined FEM/DEM fracture and fragmentation algorithmsEngineering Fracture Mechanics, 2002
- Contact analysis of large numbers of interacting bodies using discrete modal methods for simulating material failure on the microscopic scaleEngineering Computations, 1988
- Tensile strength of technical ceramics and glassStrength of Materials, 1981
- Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elementsCement and Concrete Research, 1976
- The fracture of glassPhysics Education, 1968
- Experimental Study of Fracture of Glass:I, The Fracture ProcessJournal of the American Ceramic Society, 1954
- Shock Wave in GlassNature, 1947