Effect of B and N Content and Austenitization Temperature on the Tensile and Impact Properties of Modified 9Cr-1Mo Steels
Open Access
Abstract
The present study investigates the relative effect of B and N concentrations and the austenitization temperature on the microstructure and mechanical properties (tensile and Charpy impact) of modified 9Cr-1Mo (P91) steels. Initially, a B-free P91 steel (with 500 ppm N) and four different B-containing steels (25–100 ppm) with varying N concentrations (20–108 ppm) were hot-rolled, normalized from different austenitization temperatures (1000–1100 °C/1 h) and finally tempered at 760 °C for 1 h. A Charpy impact test shows that the ductile–brittle transition temperature (DBTT) of all the B-added steels decreases with an increase in the austenitization temperature, where the 100 ppm B steel offers the lowest DBTT (−85 °C). Similarly, the strength increases with the increase in the austenitization temperature (1100 °C), with a slight drop in ductility. The influence of precipitates on the microstructure and mechanical properties is explained considering the B enrichment at the precipitates and the thermodynamic stability of the precipitates. The 100 ppm B steel (containing the maximum B and minimum N), normalized from 1100 °C austenitization, shows the best combination of tensile and Charpy impact properties, owing to the effective dissolution of coarse M23C6 and MX precipitates during the normalization treatment and the formation of fine B-rich (Fe,Cr)23(B,C)6 precipitates during the subsequent tempering.Keywords
Funding Information
- Board of Research in Nuclear Sciences (BRNS) (36(2)/14/26/2016-BRNS/36026)
This publication has 33 references indexed in Scilit:
- Influence of boron on strain hardening behaviour and ductility of low carbon hot rolled steelMaterials Science and Engineering: A, 2011
- Atom probe tomography and nano secondary ion mass spectroscopy investigation of the segregation of boron at austenite grain boundaries in 0.5 wt.% carbon steelsMetals and Materials International, 2011
- Effect of Tempering on Microstructure and Mechanical Properties of Boron Containing 10%Cr SteelISIJ International, 2011
- Microstructure of a Creep-Resistant 10 Pct Chromium Steel Containing 250 ppm BoronMetallurgical and Materials Transactions A, 2010
- Fracture toughness of irradiated modified 9Cr–1Mo steelJournal of Nuclear Materials, 2009
- Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plantsScience and Technology of Advanced Materials, 2008
- Alloy design of creep resistant 9Cr steel using a dispersion of nano-sized carbonitridesInternational Journal of Pressure Vessels and Piping, 2007
- Stabilization of martensitic microstructure in advanced 9Cr steel during creep at high temperatureMaterials Science and Engineering: A, 2004
- Effects of Boron Addition on Tempering Processes in an Fe-9Cr-0.1C Alloy MartensiteISIJ International, 2002
- Atom probe field ion microscopy investigation of boron containing martensitic 9 Pct chromium steelMetallurgical and Materials Transactions A, 2000