3D Printed Parts Exhibit Superior Elastic Properties to Milled Ones
Open Access
Abstract
While many studies on fused filament fabrication (FFF)-printed polymers focus on ultimate tensile strength or failure analysis, the elastic region of the stress–strain curve is frequently overlooked. However, in most engineering applications, components operate well within the elastic range. In mechanical joints, support frames, and other load-bearing structures, stiffness and elastic response are more critical than post-failure behavior, as these properties determine system performance during standard operating conditions before any damage occurs. This study examines the elastic properties of acrylonitrile butadiene styrene (ABS) components fabricated via FFF, with a focus on the impact of printing orientation and nozzle temperature. Tensile tests were performed according to ISO 527-2:1993, and the results were compared to those of milled ABS parts (referred to as FT). Two print orientations were studied: XT, where the layers are oriented perpendicular to the loading direction, and ZT, where the layers are aligned parallel to the loading direction (load-aligned). The study reveals that printing orientation has a significant impact on mechanical behavior. The specimens printed in the ZT orientation exhibited superior elastic modulus and tensile strength compared to the XT specimens and also outperformed the milled FT parts. At 245 °C, the ZT specimens achieved an average tensile strength of 41.0 MPa, substantially higher than the FT’s 31.1 MPa. Moreover, the ZT had approximately 12.6% higher elastic moduli than the FT (1.97 GPa ZT compared to 1.74 GPa FT). Although the FT parts showed higher strain at break, the ZT-printed parts demonstrated a stiffness and strength that suggest their viability as replacements for machined components in load-bearing applications.Keywords
Funding Information
- Inoprogress (02-019-K-0116)
- European Union (02-019-K-0116)
This publication has 25 references indexed in Scilit:
- The thermal properties of FDM printed polymeric materials: A reviewPolymer Degradation and Stability, 2024
- Investigating the effects of printing temperatures and deposition on the compressive properties and density of 3D printed polyetheretherketoneProgress in Additive Manufacturing, 2023
- Additive manufacturing: expanding 3D printing horizon in industry 4.0International Journal on Interactive Design and Manufacturing (IJIDeM), 2022
- 3D printed parts and mechanical properties: Influencing parameters, sustainability aspects, global market scenario, challenges and applicationsAdvanced Industrial and Engineering Polymer Research, 2022
- Factors affecting ultimate tensile strength and impact toughness of 3D printed parts using fractional factorial designThe International Journal of Advanced Manufacturing Technology, 2022
- Printing parameters and materials affecting mechanical properties of FDM-3D printed Parts: Perspective and prospectsMaterials Today: Proceedings, 2022
- A review of fused filament fabrication (FFF): Process parameters and their impact on the tribological behavior of polymers (ABS)Materials Today: Proceedings, 2022
- Failure surface development for ABS fused filament fabrication partsAdditive Manufacturing, 2019
- The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA)Journal of Manufacturing Processes, 2018
- Process-structure-property effects on ABS bond strength in fused filament fabricationAdditive Manufacturing, 2018