Si MAS‐NMR Study of Hydrated Cement Paste and Mortar Made with and without Silica Fume
Authors:
- 1 February 1995
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 78 (2) , 342-346
Abstract
This paper presents 29 Si MAS‐NMR measurements that trace the hydration process in both cement paste and mortar specimens made from ordinary portland cement, Type I, when the cement content is replaced by 0, 10, 15, and 20 wt% of silica fume. The specimens were moist‐cured for 3, 7, 14, 28, 90, and 180 days at a laboratory temperature of 21°C (69.8°F). Compressive strength for all tested specimens was also determined. The results show that the degree of hydration (Q 1 + Q 2 )/(Q°+ Q 1 + Q 2 ) increased with increasing content of silica fume, especially at the early ages of 3 to 28 days. In the same manner, compressive strength results were markedly increased up to 14 days and were lowered at later ages, compared to the control mix (0 wt% silica fume).Keywords
This publication has 6 references indexed in Scilit:
- 29 Si Magic‐Angle‐Spinning Nuclear Magnetic Resonance Study of Hydrated Cement Paste and MortarJournal of the American Ceramic Society, 1990
- 29Si MAS NMR studies of portland cement components and effects of microsilica on the hydration reactionCement and Concrete Research, 1988
- Investigations of Calcium Silicate Hydrate Structure Using Silicon‐29 Nuclear Magnetic Resonance SpectroscopyJournal of the American Ceramic Society, 1988
- Evaluation of degree of hydration in concrete using 29Si magic angle spinning NMR in solidsCement and Concrete Research, 1988
- Hydration of Tricalcium Silicate Followed by 29Si NMR with Cross‐PolarizationJournal of the American Ceramic Society, 1988
- Hydration reactions in portland cement-silica fume blendsCement and Concrete Research, 1985