Engineering the acidity and accessibility of the zeolite ZSM-5 for efficient bio-oil upgrading in catalytic pyrolysis of lignocellulose
Authors:
- Héctor HernandoHHHéctor Hernando
- Cristina Ochoa-HernándezCOCristina Ochoa-Hernández
- Pieter C. A. BruijnincxPBPieter C. A. Bruijnincx
- Klaartje HoubenKHKlaartje Houben
- Marc BaldusMBMarc Baldus
- Patricia PizarroPPPatricia Pizarro
- Juan M. CoronadoJCJuan M. Coronado
- Javier FermosoJavier Fermoso
- Jiří ČejkaJČJiří Čejka
- Bert M. WeckhuysenBWBert M. Weckhuysen
- David P. SerranoDSDavid P. Serrano
- 22 June 2018
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 20 (15) , 3499-3511
Abstract
The properties of the zeolite ZSM-5 have been optimised for the production and deoxygenation of the bio-oil* (bio-oil on water-free basis) fraction by lignocellulose catalytic pyrolysis. Two ZSM-5 supports possessing high mesopore/external surface area, and therefore enhanced accessibility, have been employed to promote the conversion of the bulky compounds formed in the primary cracking of lignocellulose. These supports are a nanocrystalline material (n-ZSM-5) and a hierarchical sample (h-ZSM-5) of different Si/Al ratios and acid site concentrations. Acidic features of both zeolites have been modified and adjusted by incorporation of ZrO2, which has a significant effect on the concentration and distribution of both Brønsted and Lewis acid sites. These materials have been tested in the catalytic pyrolysis of acid-washed wheat straw (WS-ac) using a two-step (thermal/catalytic) reaction system at different catalyst/biomass ratios. The results obtained have been assessed in terms of oxygen content, energy yield and composition of the produced bio-oil*, taking also into account the selectivity towards the different deoxygenation pathways. The ZrO2/n-ZSM-5 sample showed remarkable performance in the biomass catalytic pyrolysis, as a result of the appropriate combination of accessibility and acidic properties. In particular, modification of the zeolitic support acidity by incorporation of highly dispersed ZrO2 effectively decreased the extent of secondary reactions, such as severe cracking and coke formation, as well as promoted the conversion of the oligomers formed initially by lignocellulose pyrolysis, thus sharply decreasing the proportion of the components not detected by GC-MS in the upgraded bio-oil*.Keywords
Funding Information
- FP7 Energy (FP7/2007–2013 / 604307)
- Grantová Agentura České Republiky (Czech Science Foundation / P106/12/G015)
- Secretaría de Estado de Investigación, Desarrollo e Innovación (CATPLASBIO / CTQ2014-602209-R)
This publication has 54 references indexed in Scilit:
- Review of fast pyrolysis of biomass and product upgradingBiomass and Bioenergy, 2012
- Styrene oligomerization as a molecular probe reaction for Brønsted acidity at the nanoscalePhysical Chemistry Chemical Physics, 2012
- Liquid phase aldol condensation reactions with MgO–ZrO2 and shape-selective nitrogen-substituted NaYApplied Catalysis A: General, 2011
- Styrene oligomerization as a molecular probe reaction for zeolite acidity: a UV-Vis spectroscopy and DFT studyPhysical Chemistry Chemical Physics, 2010
- Catalytic fast pyrolysis of glucose with HZSM-5: The combined homogeneous and heterogeneous reactionsJournal of Catalysis, 2010
- The acid properties of H-ZSM-5 as studied by NH3-TPD and 27Al-MAS-NMR spectroscopyApplied Catalysis A: General, 2007
- Processing biomass-derived oxygenates in the oil refinery: Catalytic cracking (FCC) reaction pathways and role of catalystJournal of Catalysis, 2007
- Study on Aging of Tetragonal Zirconia by Coupling Impedance and Raman Spectroscopies in Water Vapor AtmosphereJournal of the Electrochemical Society, 2004
- On the acid-dealumination of USY zeolite: a solid state NMR investigationJournal of Molecular Catalysis A: Chemical, 2003
- Production of high grade fuels and chemicals from catalytic pyrolysis of biomassCatalysis Today, 1996