Directed energy deposition of 18NiM300 steel: effect of process and post processing conditions on microstructure and properties
Open Access
- 20 May 2024
- journal article
- research article
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 25 (1) , 2346071
Abstract
This current study investigates the effect of Direct Energy Deposition (DED) process conditions on the properties and microstructure of M300 maraging steel samples. The investigation centers on two key factors: laser power and deposition environment. The microstructure of this tool steel is analyzed by computing the Primary Cellular Arm Spacing. The findings revealed a significant influence of both inert atmosphere and laser power on cooling conditions. These different cooling rates influence the phase content as demonstrated by X-Ray Diffraction and Electron Backscatter Diffraction measurements. It was demonstrated the presence of different content of residual austenite at cell boundaries. These distinct microstructural features caused variations in the hardness values of the printed samples. Furthermore, a direct aging heat treatment was implemented, that was chosen from Differential Scanning Calorimetry measurements results. This heat treatment proves effective in achieving consistent hardness increases and eliminated the differences among samples built in different process conditions. This outcome suggests the possibility of selecting the most economically viable DED parameters for optimal results.Keywords
This publication has 42 references indexed in Scilit:
- Cooling rate measurement in directed energy deposition using photodiode-based planck thermometry (PDPT)Additive Manufacturing Letters, 2022
- Effect of the parametric optimization and heat-treatment on the 18Ni-300 maraging steel microstructural properties manufactured by directed energy depositionThe International Journal of Advanced Manufacturing Technology, 2021
- Microstructure evolution of 316L produced by HP-SLM (high power selective laser melting)Additive Manufacturing, 2018
- The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steelAdditive Manufacturing, 2018
- Orientation of austenite reverted from martensite in Fe-2Mn-1.5Si-0.3C alloyActa Materialia, 2018
- Additive manufacturing of metalsActa Materialia, 2016
- Phase transformation in a nanostructured M300 maraging steel obtained by SPS of mechanically alloyed powdersJournal of Thermal Analysis and Calorimetry, 2010
- Ageing behaviour of an Fe–20Ni–1.8Mn–1.6Ti–0.59Al (wt%) maraging alloy: clustering, precipitation and hardeningActa Materialia, 2004
- Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steelsMetallurgical Transactions A, 1990
- The effect of particle shape on dispersion hardeningScripta Metallurgica, 1972