Analysis of Beams Prestressed with Unbonded Internal or External Tendons
Authors:
- 1 September 1993
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 119 (9) , 2680-2700
Abstract
The present study describes a nonlinear analysis model developed for the prediction of the complete moment versus deformation response of concrete beams containing bonded prestressing tendons, unbonded prestressing tendons (metallic or otherwise), and nonprestressed conventional reinforcing bars. The model uses an extensive iterative procedure for calculating the stress in unbonded tendons, fps, by performing a nonlinear analysis at various locations along the beam. The analysis is performed several times during any loading stage until the stress fps is calculated within a reasonable tolerance. Two important issues not addressed in previous investigations are considered in modeling the curvature distribution, namely: (1) The effects of member span‐to‐depth ratio and the level of shear force on the flexural deformations; and (2) the change in eccentricity under load (i.e., second‐order effects) for beams containing external tendons. Experimental verification was carried out using beam tests taken from 15 d...Keywords
This publication has 8 references indexed in Scilit:
- Evaluation of the Ultimate Steel Stress in Partially Prestressed Concrete MembersPCI Journal, 1991
- Partially Prestressed Composite Beams under Sustained and Cyclic LoadsJournal of Structural Engineering, 1988
- Ultimate Stress of Unbonded Tendons in Partially Prestressed Concrete BeamsPCI Journal, 1985
- Increase of stress in unbonded tendons in prestressed concrete beams and slabsCanadian Journal of Civil Engineering, 1981
- Ultimate Steel Stresses in Unbonded Prestressed ConcreteJournal of the Structural Division, 1978
- Reinforced Concrete Structures1975
- Discussion of “Rotational Capacity of Reinforced Concrete Beams”Journal of the Structural Division, 1967
- Rotational Capacity of Reinforced Concrete BeamsJournal of the Structural Division, 1966