A high efficiency 3.3 kW loosely-coupled wireless power transfer system without magnetic material
Authors:
- 1 September 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23293721,p. 2282-2286
Abstract
This paper proposes a loosely-coupled wireless power transfer (WPT) system without magnetic material, which has 95.0% dc-to-dc efficiency working at 1MHz and 3.3kW output power. The coil size is 320mm×320mm, and the coupling coefficient k is 14.0% at 150mm air-gap distance. The magnetic material is removed to increase system switching frequency to MHz level and eliminate the magnetic losses. Power loss models of the circuit components are presented to calculate the total losses and the system efficiency. It shows that, through designing the circuit parameters to minimize the power losses, the maximum achievable efficiency can be higher than 95% even at a coupling coefficient of 10%. This paper provides the guideline for high-frequency and high efficiency WPT system design.Keywords
This publication has 4 references indexed in Scilit:
- ZVS double-side LCC compensated resonant inverter with magnetic integration for electric vehicle wireless charger2015
- Output power and efficiency sensitivity to circuit parameter variations in double-sided LCC-compensated wireless power transfer system2015
- Development of a high efficiency primary side controlled 7kW wireless power charger2014
- Analytical model for effects of twisting on litz-wire losses2014