Monohydric aliphatic alcohols as liquid fuels for using in internal combustion engines: A review
- 13 March 2023
- journal article
- review article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 238 (4) , 1941-1975
Abstract
The environmental and air pollution brought about by the increasing energy consumption has increased the interest in the use of renewable energy sources in the transportation sector, where internal combustion engines are used, which is responsible for a large part of the exhaust emissions. Alcohol fuels have been evaluated as renewable energy sources for utilising in internal combustion engines and they are reported to have lowering exhaust emissions and costs. This study analyses four monohydric aliphatic alcohol fuels (methanol, ethanol, propanol and butanol) by reviewing the available literature to represent their applicability as an alternative fuel in internal combustion engines. In the study, researches on the directly use of acetone–butanol–ethanol and isopropanol–butanol–ethanol as alcohol fuel were also examined because the production of butanol by acetone–butanol–ethanol and isopropanol–butanol–ethanol distillation is costly, and isopropanol–butanol–ethanol is more preferred due to the corrosive feature of acetone. The higher fuel consumption of alcohol fuels than fossil fuels was the most common result, with reductions in NO x and smoke emissions except for isopropanol–butanol–ethanol, which had higher NO x emissions. It has been reported that less carbon and high oxygen content, low cetane number and high latent heat of alcohol fuels are responsible for the above results. The increase in thermal efficiency with the use of acetone–butanol–ethanol and isopropanol–butanol–ethanol in contrast to other alcohol fuels was a notable result. A comparison among the alcohol fuels showed that methanol was more effective than ethanol in reducing CO, unburned HC and smoke emissions while isopropanol–butanol–ethanol demonstrated high NO x emissions. A simultaneous reduction of NO x and Smoke emissions, which was commonly reported for most of alcohol fuels, makes a significant contribution to the development of internal combustion engines. This study gains importance in terms of comparing the individual effects of the use of alcohol fuels on exhaust emissions and better understanding the current status of these fuels.Keywords
This publication has 94 references indexed in Scilit:
- Green energy: Water-containing acetone–butanol–ethanol diesel blends fueled in diesel enginesApplied Energy, 2013
- Exhaust emissions of methanol and ethanol-unleaded gasoline blends in a spark-ignition engineThermal Science, 2013
- Simultaneous production of isopropanol, butanol, ethanol and 2,3-butanediol by Clostridium acetobutylicum ATCC 824 engineered strainsAMB Express, 2012
- Progress in the production and application of n-butanol as a biofuelRenewable and Sustainable Energy Reviews, 2011
- Effect of n-Butanol Blending with a Blend of Diesel and Biodiesel on Performance and Exhaust Emissions of a Diesel EngineIndustrial & Engineering Chemistry Research, 2011
- Engine performance and exhaust gas emissions of methanol and ethanol–diesel blendsFuel, 2010
- Stability, Lubricity, Viscosity, and Cold-Flow Properties of Alcohol−Diesel BlendsEnergy & Fuels, 2010
- Experimental investigation on the performance and emissions of a diesel engine fuelled with ethanol–diesel blendsApplied Thermal Engineering, 2009
- Performance and emission characteristics of a diesel engine using isobutanol–diesel fuel blendsRenewable Energy, 2009
- Alcoholic Fuels2006