Crab shell-derived nitrogen-doped micro-/mesoporous carbon as an effective separator coating for high energy lithium–sulfur batteries
- 21 August 2017
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 5 (37) , 19892-19900
Abstract
Lithium–sulfur (Li–S) batteries with high energy density are considered as promising for rechargeable energy storage. However, the shuttle effect hinders their practical application. Here, novel nitrogen-doped micro-/mesoporous carbon (N-MIMEC), derived from crab shells, was fabricated via a sustainable and cost-effective route. A modified separator coated with an N-MIMEC layer for Li–S batteries exhibits many advantages: (1) the micro-/mesopores provide enough surface area for sulfide adsorption, and accommodate the volume change; (2) the nitrogen in N-MIMEC enhances polysulfide adsorption and increases the electronic conductivity of the carbon framework; and (3) the conductive layer acts as an upper current collector, increasing the electrical conductivity. An enhanced Li–S battery with an N-MIMEC-coated separator was constructed, with an initial capacity of 1301 mA h g−1 and a high reversible capacity of 971.3 mA h g−1 after 100 cycles at 0.1C. Also, upon further increasing the sulfur loading from 63 wt% to 77 wt%, the corresponding Li–S batteries exhibit a high reversible capacity of 578 mA h g−1 after 500 cycles at 1C, with a decay rate of about 0.029% per cycle. Considering the green and sustainable source material, simple preparation and good electrochemical performance, the N-MIMEC-coated separator is promising for Li–S battery applications.Keywords
Funding Information
- National Natural Science Foundation of China (51432003, 51672020)
This publication has 48 references indexed in Scilit:
- Sulfur‐Immobilized, Activated Porous Carbon Nanotube Composite Based Cathodes for Lithium–Sulfur BatteriesSmall, 2017
- Effective strategies for stabilizing sulfur for advanced lithium–sulfur batteriesJournal of Materials Chemistry A, 2016
- Sole Chemical Confinement of Polysulfides on Nonporous Nitrogen/Oxygen Dual‐Doped Carbon at the Kilogram Scale for Lithium–Sulfur BatteriesAdvanced Functional Materials, 2016
- Promises and challenges of nanomaterials for lithium-based rechargeable batteriesNature Energy, 2016
- Suppression of the polysulfide-shuttle behavior in Li–S batteries through the development of a facile functional group on the polypropylene separatorMaterials Horizons, 2016
- A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteriesMaterials Horizons, 2015
- Lithium–Sulfur Batteries: Progress and ProspectsAdvanced Materials, 2015
- Preparation of a macroscopic, robust carbon-fiber monolith from filamentous fungi and its application in Li–S batteriesGreen Chemistry, 2014
- Lithium batteries: Status, prospects and futureJournal of Power Sources, 2010
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009