Infill Strategy in 3D Printed PLA Carbon Composites: Effect on Tensile Performance
Open Access
Abstract
Tuning the infill pattern is one of the key features in additive manufacturing to optimise part weight. In this work, the effect of the infill strategy, including rate and pattern type, is studied on the mechanical performance of polylactic acid (PLA)-carbon composite. In particular, three types of patterns and four filling levels are combined. These combinations are evaluated by tensile loading applied on dogbone specimens. In addition, the underlined deformation mechanisms are further explored using filament-based finite element model. The numerical simulation is built from sliced models and converted into 3D meshes to predict tensile performance. The results show that the infill rate has a nonlinear effect on the density of PLA–carbon composites, and its magnitude depends on the complexity of the generated pattern. In addition, tensile loading is found to activate varied modes of shearing and uniaxial deformations depending on the pattern type. This leads to different profiles and rankings of the tensile performance and allows the infill strategy to significantly affect the part performance, along with its density.Keywords
This publication has 20 references indexed in Scilit:
- Influence of additive manufacturing-induced anisotropy on tool wear in end milling of Ti6Al4VTribology International, 2020
- Fabrication of poly(lactic acid)/Ti composite scaffolds with enhanced mechanical properties and biocompatibility via fused filament fabrication (FFF)–based 3D printingAdditive Manufacturing, 2019
- Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA compositesComposites Part B: Engineering, 2019
- Mechanical characteristics of wood, ceramic, metal and carbon fiber-based PLA composites fabricated by FDMJournal of Materials Research and Technology, 2019
- Fused deposition modelling: a reviewRapid Prototyping Journal, 2019
- Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performancePolymer Testing, 2019
- Effects of carbon nanotube on the thermal, mechanical, and electrical properties of PLA/CNT printed parts in the FDM processSynthetic Metals, 2019
- 3D printing assisted finite element analysis for optimising the manufacturing parameters of a lumbar fusion cageMaterials & Design, 2019
- A non-retraction path planning approach for extrusion-based additive manufacturingRobotics and Computer-Integrated Manufacturing, 2017
- Implicit slicing for functionally tailored additive manufacturingComputer-Aided Design, 2016