Influence of Wear Debris on Rolling Contact Fatigue
Authors:
- 1 January 1982
- book chapter
- Published by ASTM International
- p. 255-274
Abstract
Results are presented on the influence of internally generated wear debris on the failure characteristics of rolling element bearings. The effects of lubricant filtration are studied, and by means of Weibull failure distributions the gains in fatigue life are shown to be as high as sevenfold if the filtration level is set correctly. Metallurgical results are presented which show that, when lubricant contamination is present, early failures, and particularly those which strongly influence L10 lives, are mostly surface initiated, and not subsurface in origin, as was previously believed to be the case with rolling contact.Keywords
This publication has 7 references indexed in Scilit:
- Bi-modal failure mechanisms in tribological componentsReliability Engineering, 1983
- The use of discriminant function techniques in reliability assessment and data classificationReliability Engineering, 1983
- Filtration Effects on Ball Bearing Life and Condition in a Contaminated LubricantJournal of Lubrication Technology, 1979
- Characteristics of Wear Particles Generated During Failure Progression of Rolling BearingsA S L E Transactions, 1977
- Prediction of Rolling Contact Fatigue Life in Contaminated Lubricant: Part II—ExperimentalJournal of Lubrication Technology, 1976
- Controlling contaminant wear through filtrationWear, 1975
- A New Machine for Studying the Effects of Sliding and Traction on the Fatigue Life of Point Contacts, with Initial Test ResultsA S L E Transactions, 1975