Statistical Determination of a Fretting-Induced Failure of an Electro-Deposited Coating
Author:
Open Access
Abstract
This paper describes statistical determination of fretting-induced failure of an electro-deposited coating. A fretting test is conducted using a ball-on-flat plate configuration. During a test, a frictional force is measured, along with the relative displacement between an AISI52100 ball and a coated flat specimen. Measured data are analyzed with statistical process control tools; a frictional force versus number of fretting cycles is plotted on a control chart. On the control chart, critical number of cycles to coating failure is statistically determined. Fretted surfaces are observed after interrupting a series of fretting tests. Worn surface images and wear profiles provide that the increase on the kinetic friction coefficient after a steady-state sliding is attributed to the substrate enlarged at a contact surface. There is a good agreement between observation of worn surfaces and statistical determination for fretting-induced coating failure.Keywords
Funding Information
- the National Research Foundation of Korea(NRF) (2016R1C1B1008483)
This publication has 14 references indexed in Scilit:
- A study of the frictional characteristics of metal and ceramic counterfaces against electro-deposited coatings for use on automotive seat railsWear, 2014
- Tribological investigations on MoS2-based nanolubricant for machine tool slidewaysProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2014
- Dissipated energy and fretting damage in CoCrAlY-MoS2 coatingsTribology International, 2010
- Development and characterization of low friction coatings for protection against fretting wear in aerospace componentsThin Solid Films, 2008
- Statistical process control in machining, a case study for machine tool capability and process capabilityMaterials & Design (1980-2015), 2006
- Development of a Wöhler-like approach to quantify the Ti(CxNy) coatings durability under oscillating sliding conditionsWear, 2005
- Fretting behavior of low-friction coatings: contribution to industrial selectionTribology International, 2001
- An adaptive acceptance control chart for tool wearInternational Journal of Production Research, 1998
- Analysis of sliding behaviour for fretting loadings: determination of transition criteriaWear, 1995
- Statistical process control of acoustic emission for cutting tool monitoringMechanical Systems and Signal Processing, 1989