Experimental Research of Welding Residual Stress of Butt Welded Joint of Thick Steel Plate
Open Access
Abstract
The thickness of steel plates used in the structure has gradually increased to meet the load-bearing capacity requirements of long-span steel bridges. Thick steel plate welded by arc welding process will result in considerable welding residual stress with complex distribution. Large welding residual stress will significantly impact the performance of steel bridges. At present; residual welding stress of thick steel plates is not considered enough in bridge engineering; which could lead to potential dangers in safety. In this paper; a butt welded joint with a thickness of 80 mm was designed; the residual welding stress was measured by X-ray diffraction method; and the distribution of residual stress in the direction perpendicular to the weld seam and along the direction of the weld seam is analyzed; and the distribution pattern of welding residual stress in thick steel plate is systematically studied. It is found that in the area near the weld; the stress in the direction along the weld seam is more significant than that in the perpendicular direction; the peak stress in the direction perpendicular to the weld seam usually appears in the weld seam and the heat-affected zone; and the maximum value tends to appear close to the last weld bead on the surface; on the path perpendicular to the weld seam; the stress in the direction perpendicular to the weld seam is distributed in a “Π” shape; the stress in the direction along the weld seam is distributed in an “M” shape; and the stresses in the direction along and perpendicular to the weld seam are symmetrically distributed; however the axis of symmetry may appear anywhere in and around the weld seam. The results could serve as a reference for welding residual stress analysis and guide optimization design of steel bridges made of thick steel plates.Keywords
Funding Information
- Major Scientific Research Funding Project of Science and Technology Research and Development Program of China State Railway Group Co., Ltd. (P2019G002)
This publication has 21 references indexed in Scilit:
- Residual stress distributions in arc, laser and electron-beam welds in 30 mm thick SA508 steel: A cross-process comparisonInternational Journal of Pressure Vessels and Piping, 2018
- Experimental Investigation on the Residual Stresses in a Thick Joint with a Partial Repair Weld Using Multiple-Cut Contour MethodMaterials, 2018
- Welding Residual Stress Analysis and Fatigue Strength Assessment of Multi-Pass Dissimilar Material Welded Joint between Alloy 617 and 12Cr SteelMetals, 2017
- Residual stresses formation in multi-pass weldment: A numerical and experimental studyJournal of Constructional Steel Research, 2017
- Finite element analysis of residual stress distribution in a thick plate joined using two-pole tandem electro-gas weldingJournal of Materials Processing Technology, 2016
- Welding residual stresses in thick steel plates—MAG-welded at low ambient temperatureWelding in the World, 2015
- Neutron diffraction investigations on residual stresses contributing to the fatigue crack growth in ferritic steel tubular bridgesInternational Journal of Pressure Vessels and Piping, 2012
- A study on mechanical and microstructure characteristics of the STS304L butt joints using hybrid CO2 laser-gas metal arc weldingMaterials & Design (1980-2015), 2011
- Prediction of welding distortion and residual stress in a thin plate butt-welded jointComputational Materials Science, 2008
- Residual stresses and fracture mechanics analysis of a crack in welds of high strength steelsEngineering Fracture Mechanics, 2007