Mechanical Properties of Poly(Butylene Succinate) Reinforced with Continuously Steam-Exploded Cotton Stalk Bast
- 30 September 2011
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 50 (14) , 1405-1411
Abstract
Poly(butylene succinate) (PBS) was reinforced by cotton stalk bast fibers (CSBF), which had been pretreated by the continuous steam explosion method. The influence of water content in CSBF during the explosion and fiber content on the mechanical properties of CSBF/PBS biocomposites was investigated. The results showed that the incorporation of CSBF decreased the tensile and impact strength, while significantly enhanced the flexural strength, flexural modulus and tensile modulus. The mechanical properties of biocomposites reinforced by exploded fibers were much better than that of the biocomposites reinforced by non-exploded fibers. Biocomposites reinforced by fibers with 40 and 50 wt% water contents during the explosion had the best mechanical properties. The morphology of CSBF and biocomposites was evaluated by SEM, which demonstrated that fibers with 40 and 50 wt% water contents had better separation and rougher microsurfaces, indicating a better adhesion between PBS matrix and fibers.Keywords
This publication has 40 references indexed in Scilit:
- Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatmentBioresource Technology, 2010
- Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable compositeJournal of Applied Polymer Science, 2009
- Mechanical and Rheological Characterization of Treated Jute-HDPE Composites with a Different MorphologyJournal of Reinforced Plastics and Composites, 2006
- Water bamboo husk‐reinforced poly(butylene succinate) biodegradable compositesJournal of Applied Polymer Science, 2005
- Natural fibres as reinforcement in polylactic acid (PLA) compositesComposites Science and Technology, 2003
- Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene compositesComposites Science and Technology, 2003
- Reinforcement of Recycled Polyethylene with Wood Fibers Heat TreatedJournal of Reinforced Plastics and Composites, 2001
- High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding ProcessJournal of Reinforced Plastics and Composites, 2001
- Properties and modification methods for vegetable fibers for natural fiber compositesJournal of Applied Polymer Science, 1996
- Influence of maleic anhydride as a coupling agent on the performance of wood fiber‐polystyrene compositesPolymer Engineering & Science, 1991