A 6.5kV wire-bondless, double-sided cooling power electronic module
Authors:
- 1 September 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1 (23293721) , 444-450
Abstract
A 6.5kV, wire-bondless power electronics module with a double-sided cooling is proposed and evaluated. A direct solder attachment is employed to minimize parasitic circuit elements and increase current handling capability as well as to enable a double-sided cooling capability with mechanical robustness. Finite element simulations were performed to investigate the thermal performance, critical breakdown voltage and mechanical stresses of the power electronic module. The active devices in the proposed modules were demonstrated to withstand a 6.5kV breakdown voltage with a reasonable leakage current. The parasitic inductance is also modeled and compared between wire-bonded and wire-bondless power module. The mechanical and electrical performance of the power module agreed well with simulation results.Keywords
This publication has 19 references indexed in Scilit:
- Thermal cycling reliability of SnAgCu and SnPb solder joints: A comparison for several IC-packagesMicroelectronics Reliability, 2006
- Comparative thermal and thermomechanical analyses of solder-bump and direct-solder bonded power device packages having double-sided cooling capability2004
- Present problems of power module packaging technologyMicroelectronics Reliability, 2003
- Fatigue life models for SnAgCu and SnPb solder joints evaluated by experiments and simulation2003
- Innovative press pack modules for high power IGBTs2002
- Evaluation of metal post interconnected parallel plate structure for power electronic building blocks2002
- Failure modes and FEM analysis of power electronic packagingFinite Elements in Analysis and Design, 2002
- Trends in power semiconductor devicesIEEE Transactions on Electron Devices, 1996
- High frequency, low cost, power packaging using thin film power overlay technology1995
- Fatigue Life of Leadless Chip Carrier Solder Joints During Power CyclingIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1983