Design and analysis of a new axial flux permanent magnet synchronous generator for wind
Open Access
- 1 November 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 643 (1) , 012043
Abstract
The paper deals with a new design of a low-speed disk permanent magnet axial flux synchronous machine for decentralized power generation, which has improved weight-size parameters. In the new design the value of the air gap value is reduced by removing all inter-coil connections from the gap and also a concentrated winding with a high winding coefficient is applied. A two-rotor prototype of this design is created (150 W, 83 V, 250 rpm) and its magnetic circuit and the concentrated windings arrangement are described, as well as the results of the machine experimental study. The 2D finite element analysis is used to determine the effect of the air gap value effect on the disk slotless generator parameters. The method of rational choice of the machine main dimensions and the parameters of its winding according to nominal data and electromagnetic loads limitations are presented. Comparison of parameters and characteristics of a 20-pole-pair 5 kW synchronous wind generator with the new design and cylindrical one with tangential magnetization is performed. The proposed slotless design exceeds the cylindrical one in efficiency and requires less material costs. The limitations are the higher value of the outer machine diameter and the required large magnets mass.Keywords
This publication has 8 references indexed in Scilit:
- A Novel Axial Flux Magnetically Geared Machine for Power Split ApplicationIEEE Transactions on Industry Applications, 2018
- Power Factor Improvement of a Transverse Flux Machine With High Torque DensityIEEE Transactions on Industry Applications, 2018
- Design Considerations of a Transverse Flux Machine for Direct-Drive Wind Turbine ApplicationsIEEE Transactions on Industry Applications, 2018
- Overview of Disk Designs of Electromechanical Energy Converters for Various ApplicationsElectrotechnical Systems and Complexes, 2018
- Improved Analytical Modeling of Permanent Magnet Leakage Flux in Design of the Coreless Axial Flux Permanent Magnet GeneratorxCanadian Journal of Electrical and Computer Engineering, 2017
- Analytical modeling of a novel transverse flux machine for direct drive wind turbine applications2015
- Estimating the effectiveness of design embodiment of permanent magnets for low-speed synchronous generators based on calculation of a magnetic fieldRussian Electrical Engineering, 2014
- Torque Density of Radial, Axial and Transverse Flux Permanent Magnet Machine TopologiesIEEE Transactions on Magnetics, 2013