High-Thrust Linear Actuator Based on Double Corner-Pole Airgaps for Proportional Relief Valve
Authors:
- 31 January 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 5, 1-4
Abstract
This letter presents a high-thrust linear actuator for use in a proportional relief valve, based on double corner-pole airgaps formed by the structure of welding sleeve and step armature. The magnetic flux through the double corner-pole airgaps are divided into three parts of two radial fluxes (Φ1, Φ3) and one axial flux (Φ2), resulting in a linear characteristic with high-thrust force on the armature of the actuator. Parameter improvement in the limited space is analyzed based on modeling, and optimized results for a prototype actuator were obtained. The experimental and simulation results agree well. The prototype actuator can produce a thrust force of 110 N with a rated power of 12 W, and is linear within 4%, with 2% hysteresis over the displacement range of 0.8 to 2.3 mm. The force step response time of the actuator reaches 51 ms, and the force frequency response (-3 dB) reaches 36 Hz for a displacement of 1.5 mm.Keywords
This publication has 9 references indexed in Scilit:
- Experimental Validation of a Hybrid Analytical-FEM Model of an Electromagnetic Engine Valve Actuator and Its Control ApplicationIEEE/ASME Transactions on Mechatronics, 2013
- Optimal Configuration for Electromagnets and Coils in Magnetic ActuatorsIEEE Transactions on Magnetics, 2012
- Parameters for Optimizing the Forces Between Linear Multipole Magnet ArraysIEEE Magnetics Letters, 2010
- Variable-airgap, cylindrical, linear variable reluctance actuators for high-force, medium-stroke applicationsIET Electric Power Applications, 2009
- Influence of Different Factors on the Static Force Characteristics of a Permanent Magnet Linear ActuatorSensor Letters, 2009
- The design optimization of the electromechanical actuatorStructural and Multidisciplinary Optimization, 2008
- Evaluation of the flow forces on a direct (single stage) proportional valve by means of a computational fluid dynamic analysisEnergy Conversion and Management, 2007
- Novel bidirectional linear actuator for electrohydraulic valvesIEEE Transactions on Magnetics, 2005
- Static and Dynamic Electromagnetic Actuator Designs for a Fluctuating Force Module (FFM) Calibration Test FacilityIEEE Transactions on Magnetics, 2004