Direct Color Printing with an Electron Beam
- 11 May 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (6) , 4422-4429
Abstract
The direct patterning of colors using the bombardment of a focused beam of electrons onto a thin-film stack consisting of polymethyl methacrylate (PMMA) coated with a thin nickel film is demonstrated. This direct electron-beam color printing (DECP) approach creates variations in the height of a Fabry-Perot (FP) cavity, resulting directly in a color print without the need for pre-patterned substrates, distinct from some direct laser writing methods. Notably, the resolution and pixel size of the color prints are defined by the electron-beam. Height measurements with ~5 nm accuracy through color image analysis of an electron-beam-patterned FP cavity were carried out. This technique also introduces a reflectance-based measurement of the point exposure function (PEF) of a focused electron beam, aiding in rapid PEF measurements for accurate proximity effect corrections in electron-beam lithography (EBL). In addition to generating color, the grayscale lithographic nature of this process was used to produce blazed gratings and could enable the fabrication of other 2.5D optical elements with precise height control.Keywords
Funding Information
- Agency for Science, Technology and Research (1437C00135)
- National Research Foundation Singapore (NRF-CRP001-021, NRF-CRP8-2011-07)
- Science and Engineering Research Council (092154099, 0926030138, 1527300025)
This publication has 44 references indexed in Scilit:
- Large-area flexible 3D optical negative index metamaterial formed by nanotransfer printingNature Nanotechnology, 2011
- Preparing patterned carbonaceous nanostructures directly by overexposure of PMMA using electron-beam lithographyNanotechnology, 2009
- Fabrication of Three-Dimensional Hydrogen Silsesquioxane Resist Structure using Electron Beam LithographyJapanese Journal of Applied Physics, 2006
- Highly Accurate Proximity Effect Correction for 100 kV Electron Projection LithographyJapanese Journal of Applied Physics, 2005
- Determination of proximity effect parameters and the shape bias parameter in electron beam lithographyMicroelectronic Engineering, 2000
- LET effect on cross-linking and scission mechanisms of PMMA during irradiationRadiation Physics and Chemistry, 1999
- Evaluation, verification and error determination of proximity parameters α, β and ν in electron beam lithographyMicroelectronic Engineering, 1993
- Experimental study on proximity effects in high voltage e-beam lithographyMicroelectronic Engineering, 1990
- Proximity effect in electron-beam lithographyJournal of Vacuum Science and Technology, 1975
- The C.I.E. colorimetric standards and their useTransactions of the Optical Society, 1931