A new empirical model for self-leveling behavior of cylindrical particle beds
Authors:
- 8 January 2016
- journal article
- research article
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 53 (5) , 713-725
Abstract
During the material relocation phase of core disruptive accidents in sodium-cooled fast reactors, the rapid quenching and fragmentation of molten materials discharged from the reactor core into the lower plenum region can lead to the formation of debris beds. Coolant boiling may lead to leveling of the mound-shaped beds, which changes both the beds' coolability with decay heat in the fuel and the neutronic characteristics. In this study, a series of experiments using simulant materials were performed to develop an experimental database of self-leveling processes of particle beds in a cylindrical system. To simulate the coolant boiling in the beds in the experiments, a gas injection method was used to percolate nitrogen gas uniformly through the base of a bed with a conical-shaped mound. Time variations in bed height during the self-leveling process were measured for different particle sizes, densities and sphericities, and gas injection velocities. Using a dimensional analysis approach, a new model was proposed. This model correlates the experimental data on transient bed height with an empirical equation using a characteristic time for self-leveling development and an equilibrium bed height. The proposed model reasonably predicts the self-leveling development of particle beds.Keywords
This publication has 22 references indexed in Scilit:
- An experimental investigation on self-leveling behavior of debris beds using gas-injectionExperimental Thermal and Fluid Science, 2013
- Experimental Studies and Empirical Models for the Transient Self-Leveling Behavior in Debris BedJournal of Nuclear Science and Technology, 2011
- Experimental investigation of bubbling in particle beds with high solid holdupExperimental Thermal and Fluid Science, 2011
- Experimental investigation on self-leveling behavior in debris bedsNuclear Engineering and Design, 2011
- Self-Leveling Onset Criteria in Debris BedsJournal of Nuclear Science and Technology, 2010
- First 3-D calculation of core disruptive accident in a large-scale sodium-cooled fast reactorAnnals of Nuclear Energy, 2009
- Minimum fluidization velocities for gas—liquid—solid three-phase systemsPowder Technology, 1998
- Cautionary Note aboutR2The American Statistician, 1985
- Structural properties of packed beds — A reviewThe Canadian Journal of Chemical Engineering, 1969
- The coefficient of resistance as a function of Reynolds number for solids of various shapesJournal of the Franklin Institute, 1934