Surprisingly High Activity for Oxygen Reduction Reaction of Selected Oxides Lacking Long Oxygen-Ion Diffusion Paths at Intermediate Temperatures: A Case Study of Cobalt-Free BaFeO3-δ
- 30 June 2014
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 6 (14) , 11180-11189
Abstract
The widespread application of solid oxide fuel cell technology requires the development of innovative electrodes with high activity for oxygen reduction reaction (ORR) at intermediate temperatures. Here, we demonstrate that a cobalt-free parent oxide BaFeO3-δ (BF), which lacks long-range oxygen-ion diffusion paths, has surprisingly high electrocatalytic activity for ORR. Both in situ high-temperature X-ray diffraction analysis on room-temperature powder and transmission electron microscopy on quenched powder are applied to investigate the crystal structure of BF. Despite the lack of long oxygen-ion diffusion paths, the easy redox of iron cations as demonstrated by thermal gravimetric analysis (TGA) and oxygen temperature-programmed desorption and the high oxygen vacancy concentration as supported by iodometric titration and TGA benefit the reduction of oxygen to oxygen ions. Moreover, the electrical conductivity relaxation technique in conjunction with a transient thermogravimetric study reveals very high surface exchange kinetics of BF oxide. At 700 °C, the area specific resistance of BF cathode, as expressed by a symmetrical cell configuration, is only ∼0.021 Ω cm2, and the derived single fuel cell achieves high power output with a peak power density of 870 mW cm–2. It suggests that an undoped BF parent oxide can be used as a high-efficiency catalyst for ORR.Keywords
This publication has 40 references indexed in Scilit:
- A Highly Active Perovskite Electrode for the Oxygen Reduction Reaction Below 600 °CAngewandte Chemie International Edition, 2013
- Perovskite Sr1–xCexCoO3−δ (0.05 ≤ x ≤ 0.15) as Superior Cathodes for Intermediate Temperature Solid Oxide Fuel CellsACS Applied Materials & Interfaces, 2013
- Demonstration of a Liquid-Tin Anode Solid-Oxide Fuel Cell (LTA-SOFC) Operating from Biodiesel FuelEnergy & Fuels, 2009
- High performance solid oxide fuel cells with electrocatalytically enhanced (La, Sr)MnO3 cathodesElectrochemistry Communications, 2009
- A thermally self-sustained micro solid-oxide fuel-cell stack with high power densityNature, 2005
- Optimisation of processing and microstructural parameters of LSM cathodes to improve the electrochemical performance of anode-supported SOFCsJournal of Power Sources, 2005
- A high-performance cathode for the next generation of solid-oxide fuel cellsNature, 2004
- Direct Hydrocarbon Solid Oxide Fuel CellsChemical Reviews, 2004
- Effect of polarization on the electrode behavior and microstructure of (La,Sr)MnO3 electrodes of solid oxide fuel cellsJournal of Solid State Electrochemistry, 2004
- (La,Sr)MnO3–(Ce,Gd)O2−x composite cathodes for solid oxide fuel cellsSolid State Ionics, 2001