DC-pulse atmospheric-pressure plasma jet and dielectric barrier discharge surface treatments on fluorine-doped tin oxide for perovskite solar cell application
Authors:
- 20 December 2017
- journal article
- research article
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 51 (2) , 025502
Abstract
Nitrogen DC-pulse atmospheric-pressure plasma jet (APPJ) and nitrogen dielectric barrier discharge (DBD) were applied to pre-treat fluorine-doped tin oxide (FTO) glass substrates for perovskite solar cells (PSCs). Nitrogen DC-pulse APPJ treatment (substrate temperature: ~400 °C) for 10 s can effectively increase the wettability, whereas nitrogen DBD treatment (maximum substrate temperature: ~140 °C) achieved limited improvement in wettability even with increased treatment time of 60 s. XPS results indicate that 10 s APPJ, 60 s DBD, and 15 min UV-ozone treatment of FTO glass substrates can decontaminate the surface. A PSC fabricated on APPJ-treated FTO showed the highest power conversion efficiency (PCE) of 14.90%; by contrast, a PSC with nitrogen DBD-treated FTO shows slightly lower PCE of 12.57% which was comparable to that of a PSC on FTO treated by a 15 min UV-ozone process. Both nitrogen DC-pulse APPJ and nitrogen DBD can decontaminate FTO substrates and can be applied for the substrate cleaning step of PSC.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 105-2221-E-002-047-MY3)
This publication has 35 references indexed in Scilit:
- Plasma chemistry model of surface microdischarge in humid air and dynamics of reactive neutral speciesJournal of Physics D: Applied Physics, 2012
- Atmospheric pressure diffuse plasma in ambient air for ITO surface cleaningApplied Surface Science, 2012
- Trisodium citrate assisted synthesis of ZnO hollow spheres via a facile precipitation route and their application as gas sensorJournal of Materials Chemistry, 2011
- Effects of Oxygen Addition and Treating Distance on Surface Cleaning of ITO Glass by a Non-Equilibrium Nitrogen Atmospheric-Pressure Plasma JetPlasma Chemistry and Plasma Processing, 2010
- Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic CellsJournal of the American Chemical Society, 2009
- Electrical and optical properties of fluorine-doped tin oxide (SnOx:F) thin films deposited on PET by using ECR–MOCVDJournal of Electroceramics, 2008
- Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesionInternational Journal of Adhesion and Adhesives, 2004
- Modification of the surface properties of a polypropylene (PP) film using an air dielectric barrier discharge plasmaApplied Surface Science, 2002
- Transition from glow silent discharge to micro-discharges in nitrogen gasPlasma Sources Science and Technology, 2000
- Etching materials with an atmospheric-pressure plasma jetPlasma Sources Science and Technology, 1998