A Wideband Frequency-Selective Rasorber With Rectangular Spiral Resonators
- 25 May 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (8) , 1688-1692
Abstract
This letter presents a frequency selective absorber (FSR) with a passband and two wide absorption bands. The structure is composed of a resistive layer and a bandpass frequency selective surface (FSS) layer. The resistive layer is a combination of metal lines with loaded resistors and rectangular spiral resonators, which generate parallel resonances. Square slots are designed in the bandpass FSS to produce parallel resonance inside the passband and perform as a metal plane outside the passband. A nearly transparent window can be obtained by adjusting the parallel resonant frequencies of two layers to be consistent. The simulation results show that the 3 dB transmission band ranges from 6.5 to 7.76 GHz, and the minimum insertion loss is 0.05 dB at 7.09 GHz. The dual-polarized FSR presents stable operating characteristics and realizes two absorption bands on both sides of the passband, and the fractional bandwidth of the reflection coefficient lower than −10 dB is up to 127%, which ranges from 2.69 to 12.04 GHz. In addition, the FSR is manufactured and measured, and the measurement results are consistent with the simulation results.Keywords
Funding Information
- National Natural Science Foundation of China (61302017)
This publication has 24 references indexed in Scilit:
- Frequency-Selective Rasorber With Interabsorption Band Transparent Window and Interdigital ResonatorIEEE Transactions on Antennas and Propagation, 2018
- Absorptive Frequency-Selective Transmission Structure With Square-Loop Hybrid ResonatorIEEE Antennas and Wireless Propagation Letters, 2017
- Design Bandpass Frequency Selective Surface Absorber Using LC ResonatorsIEEE Antennas and Wireless Propagation Letters, 2017
- Design of Absorptive/Transmissive Frequency-Selective Surface Based on Parallel ResonanceIEEE Transactions on Antennas and Propagation, 2017
- A Miniaturized Absorptive Frequency Selective SurfaceIEEE Antennas and Wireless Propagation Letters, 2014
- Design and analysis of lumped resistor loaded metamaterial absorber with transmission bandOptics Express, 2012
- Design of a wideband rasorber with a polarisation-sensitive transparent windowIET Microwaves, Antennas & Propagation, 2012
- A Frequency Selective Radome With Wideband Absorbing PropertiesIEEE Transactions on Antennas and Propagation, 2012
- Design of Frequency-Selective Surfaces Radome for a Planar Slotted Waveguide AntennaIEEE Antennas and Wireless Propagation Letters, 2009
- Frequency Selective Surfaces2000