Surface modification of microcrystalline cellulose (MCC) and its application in LDPE‐based composites
- 30 August 2016
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (1)
Abstract
Microcrystalline cellulose (MCC) was modified by grafting onto its surface ferulic acid, methacryloyl chloride and oleoyl chloride. The efficacy of the chemical modification was confirmed by X‐ray photoelectron spectroscopy. In addition, the size distribution of the cellulosic particles was investigated by optical microscopy and laser granulometry and its hydrophobicity was evaluated using a contact angle method. Finally, to investigate the affinity of modified MCC with a nonpolar polymer and to assess its potential as a biobased reinforcing filler, the modified MCC was compounded into low‐density polyethylene. An organic peroxide, dicumyl peroxide, was added at selected formulations to see if it could further enhance mechanical bonding between the polymer and the particulates. The dispersion was assessed by scanning electron microscopy. Mechanical properties were investigated through tensile testing while the melt rheology of the composites was monitored by small angle oscillatory shear rheology. The acylation modification of the MCC improved the dispersion within LDPE and enhanced the mechanical properties of the composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 44348.Keywords
Funding Information
- Citrus Research Board
This publication has 11 references indexed in Scilit:
- Vinyl acetate-modified microcrystalline cellulose-reinforced HDPE compositesprepared by twin-screw extrusionTURKISH JOURNAL OF AGRICULTURE AND FORESTRY, 2015
- From first- to third-generation biofuels: Challenges of producing a commodity from a biomass of increasing complexityAnimal Frontiers, 2013
- Cellulose reinforced high density polyethylene composites — Morphology, mechanical and thermal expansion propertiesComposites Science and Technology, 2013
- Heterogeneous modification of various celluloses with fatty acidsCellulose, 2010
- Microcrystalline Cellulose2009
- Production of pellets via extrusion–spheronisation without the incorporation of microcrystalline cellulose: A critical reviewEuropean Journal of Pharmaceutics and Biopharmaceutics, 2009
- Surface esterification of cellulose fibres: Processing and characterisation of low-density polyethylene/cellulose fibres compositesComposites Science and Technology, 2008
- Structure and properties of composites of polyethylene or maleated polyethylene and cellulose or cellulose estersJournal of Applied Polymer Science, 2006
- Controlled heterogeneous modification of cellulose fibers with fatty acids: Effect of reaction conditions on the extent of esterification and fiber propertiesJournal of Applied Polymer Science, 2006
- Dicumyl peroxide‐modified cellulose/LLDPE compositesJournal of Applied Polymer Science, 1990