Experimental and Numerical Investigation of RC Beam-Column Subassemblies Strengthened with Spiral Reinforcement under Seismic Loading
- 1 May 2022
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Practice Periodical on Structural Design and Construction
- Vol. 27 (2) , 04022013
Abstract
This research work presents experimental and numerical findings of continuous rectangular spiral shear reinforcement of beam-column connections subjected to seismic type loading. A total of four exterior beam-column subassemblies with continuous, spirally bound, rectangular reinforcements and conventional stirrups as closed manner control specimens were considered. For the spirally strengthened specimens, three different stirrups angle inclines (75°, 80°, 85°) were adopted, and their performances were compared in terms of hysteresis pattern, failure behavior, skeleton curve, stiffness degradation, and energy dissipation. Specimens with stirrups inclination angles of 75°, 80°, and 85° exhibited 14%, 28%, and 19% improvements in terms of load-carrying capability over the referred specimen, respectively. In addition to that, a numerical investigation was also carried out using ATENA version 5.3.4 finite element software to validate the experimental result. The developed numerical model shows good correlation with the experimental result and can be used in the design of spiral-strengthened reinforced concrete (RC) members.Keywords
This publication has 25 references indexed in Scilit:
- Behaviour of hybrid fibre reinforced concrete beam–column joints under reverse cyclic loadsMaterials & Design (1980-2015), 2014
- Shear tests of reinforced concrete beams with continuous rectangular spiral reinforcementConstruction and Building Materials, 2013
- Effectiveness of spirally shaped stirrups in reinforced concrete beamsEngineering Structures, 2013
- Effectiveness of Rectangular Spiral Shear Reinforcement on Infilled R/C Frames Under Cyclic LoadingJournal of Earthquake Engineering, 2011
- Steel plates rehabilitated RC beam–column joints subjected to vertical cyclic loadsConstruction and Building Materials, 2010
- Seismic Rehabilitation of Reinforced Concrete Frame Interior Beam-Column Joints with FRP CompositesJournal of Composites for Construction, 2008
- Effectiveness of CFRP-jackets and RC-jackets in post-earthquake and pre-earthquake retrofitting of beam–column subassemblagesEngineering Structures, 2008
- Modeling the cyclic response of fiber reinforced concrete jointsEngineering Structures, 2007
- Lateral load response of high performance fiber reinforced concrete beam–column jointsConstruction and Building Materials, 2005
- SEISMIC REHABILITATION OF BEAM-COLUMN JOINTS USING FRP LAMINATESJournal of Earthquake Engineering, 2001