Experimental design and multi-objective optimization of molecularly imprinted polymers for monosaccharides
- 24 April 2014
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (39) , 20177-20184
Abstract
The Taguchi method was used as an experimental design and optimization tool for the preparation of monosaccharide molecularly imprinted polymers (MIPs). Three factors, namely type of functional monomer, molar percentage of functional monomer, and functional monomer to template molar ratio, were included in the experimental design and based on the L16 (43) array, four levels of each factor were chosen. Imprinting factor, selectivity, and equilibration time were considered as quality characteristics of MIPs. For quantitative assessment of the quality of the prepared MIPs, the adsorption of template and competing substance on the prepared MIPs and non-imprinted polymers was monitored by the quartz crystal nanobalance (QCN) technique. The results revealed that regarding each quality characteristic, there are different optimal levels of the factors. The principal component analysis (PCA) technique was used to combine the quality characteristics in order to obtain a single characteristic for overall optimization of monosaccharide MIPs performance. So, PCA coupled with the Taguchi method was developed as an efficient procedure to optimize monosaccharide MIPs. The optimum values of molar percentage of functional monomer and the functional monomer to template molar ratio were found to be 30 and 4, respectively. We also found that acrylic acid (AAc) is a favourable functional monomer for preparing monosaccharide MIPs.Keywords
This publication has 39 references indexed in Scilit:
- Quality Risks of Stormwater Harvesting in GazaJournal of Environmental Science and Technology, 2011
- Theoretical and computational strategies for rational molecularly imprinted polymer designBiosensors and Bioelectronics, 2009
- Designing of MIP-based QCM sensor for the determination of Cu(II) ions in solutionSensors and Actuators B: Chemical, 2009
- Preparation of new molecularly imprinted quartz crystal microbalance hybride sensor system for 8-hydroxy-2′-deoxyguanosine determinationAnalytica Chimica Acta, 2009
- Computational design and synthesis of molecular imprinted polymers with high selectivity for removal of aniline from contaminated waterAnalytica Chimica Acta, 2008
- Influence of initiator and different polymerisation conditions on performance of molecularly imprinted polymersBiosensors and Bioelectronics, 2006
- Predicting the performance of molecularly imprinted polymers: Selective extraction of caffeine by molecularly imprinted solid phase extractionAnalytica Chimica Acta, 2006
- A 2-aminopyridine molecularly imprinted polymer surrogate micro-column for selective solid phase extraction and determination of 4-aminopyridineAnalytica Chimica Acta, 2000
- Experimental aspects of use of the quartz crystal microbalance in solutionElectrochimica Acta, 1985
- Verwendung von Schwingquarzen zur W gung d nner Schichten und zur Mikrow gungThe European Physical Journal A, 1959