Revisiting the applications of the extraction replica sample preparation technique for analysis of precipitates in engineering alloys
Authors:
Open Access
- 17 May 2022
- journal article
- research article
- Published by Elsevier in Materials Characterization
- Vol. 189
Abstract
No abstract availableKeywords
Funding Information
- KTH Royal Institute of Technology School of Architecture and the Built Environment
This publication has 47 references indexed in Scilit:
- Quantitative Analysis of Intermetallic Phase in 850°C Aging 2205 Duplex Stainless SteelAdvanced Materials Research, 2013
- Vanadium nitride precipitate phase in a 9% chromium steel for nuclear power plant applicationsJournal of Nuclear Materials, 2008
- Study of secondary intermetallic phase precipitation/dissolution in Zr alloys by high temperature–high sensitivity calorimetryJournal of Nuclear Materials, 2008
- Application of carbon extraction replicas in grain-size measurements of high-strength steels using TEMMaterials Characterization, 2007
- Aging characteristics and precipitate analysis of Cu–Ni–Mn–P alloyMaterials Science and Engineering: A, 2007
- Studies of second phase particles in different zirconium alloys using extractive carbon replica and an electrolytic anodic dissolution procedureJournal of Nuclear Materials, 2002
- Precipitates in zircaloy: Identification and the effects of irradiation and thermal treatmentJournal of Nuclear Materials, 1986
- Morphology and composition of second phase particles in zircaloy-2Journal of Nuclear Materials, 1983
- The effect of zirconium carbide on the β → α transformation structur in zircaloyJournal of Nuclear Materials, 1970
- Single-etch extraction replica method adapted for carbon filmsBritish Journal of Applied Physics, 1959