On Oxidation Resistance Mechanisms at 1273 K of Tungsten-Based Alloys Containing Chromium and Yttria
Authors:
- Felix KleinFKFelix Klein
- Tobias WegenerTWTobias Wegener
- Andrey LitnovskyAndrey Litnovsky
- Marcin RasinskiMRMarcin Rasinski
- Xiaoyue TanXTXiaoyue Tan
- Janina SchmitzJSJanina Schmitz
- Christian LinsmeierChristian Linsmeier
- Jan Willem CoenenJan Willem Coenen
- Hongchu DuHDHongchu Du
- Joachim MayerJMJoachim Mayer
- Uwe BreuerUBUwe Breuer
Open Access
Abstract
Tungsten (W) is currently deemed the main candidate for the plasma-facing armor material of the first wall of future fusion reactors, such as DEMO. Advantages of W include a high melting point, high thermal conductivity, low tritium retention, and low erosion yield. However, was an accident to occur, air ingress into the vacuum vessel could occur and the temperature of the first wall could reach to due to nuclear decay heat. In the absence of cooling, the temperature remains in that range for several weeks. At these temperatures, the radioactive tungsten oxidizes and then volatilizes. Smart W alloys are therefore being developed. Smart alloys are supposed to preserve properties of W during plasma operation while suppressing tungsten oxide formation in case of an accident. This study focuses on investigations of thin film smart alloys produced by magnetron sputtering. These alloys provide an idealistic system with a homogeneous distribution of the elements W, chromium (Cr), and yttrium (Y) on an atomic scale. The recommended composition is W with 12 weight % of Cr and weight % of Y. Passivation and a suppression of WO3 sublimation is shown. For the first time, the mechanisms yielding the improved oxidation resistance are analyzed in detail. A protective Cr2O3 layer forms at the surface. The different stages of the oxidation processes up to the failure of the protective function are analyzed for the first time. Using 18O as a tracer, it is shown for the first time that the oxide growth occurs at the surface of the protective oxide. The Cr is continuously replenished from the bulk of the sample, including the Cr-rich phase which forms during exposure at . A homogenous distribution of yttria within the W-matrix, which is preserved during oxidation, is a peculiarity of the analyzed alloy. Further, an Y-enriched nucleation site is found at the interface between metal and oxide. This nucleation sites are deemed to be crucial for the improved oxidation resistance.
Keywords
Funding Information
- H2020 Euratom (633053)
This publication has 47 references indexed in Scilit:
- Oxidation behaviour of silicon-free tungsten alloys for use as the first wall materialPhysica Scripta, 2011
- Self passivating W-based alloys as plasma facing material for nuclear fusionPhysica Scripta, 2007
- Isotopic compositions of the elements 1997 (Technical Report)Pure and Applied Chemistry, 1998
- The influence of yttrium ion implantation on the oxidation behaviour of powder metallurgically produced chromiumSurface and Coatings Technology, 1996
- The reactive element effect (REE) in oxidation of alloysJournal de Physique IV, 1993
- GRAIN BOUNDARY SELF AND IMPURITY DIFFUSION IN TUNGSTEN IN THE TEMPERATURE RANGE OF ACTIVATED SINTERINGLe Journal de Physique Colloques, 1990
- Grain Boundary Segregation of Yttrium in Chromia ScalesJournal of the Electrochemical Society, 1988
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesActa Crystallographica Section A, 1976
- Influence of substrate temperature and deposition rate on structure of thick sputtered Cu coatingsJournal of Vacuum Science and Technology, 1975
- High temperature X-ray metallographyJournal of the Less Common Metals, 1963