Etch mechanisms of hybrid low-k material (SiOCH with porogen) in fluorocarbon based plasma
Authors:
- M. DarnonMDM. Darnon
- T. ChevolleauTCT. Chevolleau
- L. VallierLVL. Vallier
- O. JoubertOJO. Joubert
- N. PossemeNPN. Posseme
- N. RochatNRN. Rochat
- Ying ZhangYZYing Zhang
- Gottlieb S. OehrleinGOGottlieb S. Oehrlein
- Ferdinand H. BellFBFerdinand H. Bell
- M. SchaepkensMSM. Schaepkens
- 12 April 2007
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 25 (3) , 715-720
Abstract
This study is dedicated to the etching of a low- material using the late porogen removal approach. In this approach, the porogen is removed by thermal annealing or UV curing after patterning or copper filling. Starting from a based plasma, the etch rate decreases with an Ar dilution or by adding a polymerizing gas such as . On the other hand, the etch rate increases with or addition in the fluorocarbon gas mixture. X-ray photoelectron spectroscopy analyses show that the etching is controlled by the thickness of the fluorocarbon layer formed at the top surface of the hybrid material during the steady state etch regime. An etch stop phenomenon is even observed with highly polymerizing etch chemistries due to the formation of a thick fluorocarbon layer. Infrared spectroscopy analysis shows that the hybrid film is not damaged by the different etching chemistries investigated in contrast to the porous material.
Keywords
This publication has 22 references indexed in Scilit:
- Precursor chemistry for ULK CVDMicroelectronic Engineering, 2005
- Challenges in the implementation of low-k dielectrics in the back-end of lineMicroelectronic Engineering, 2005
- Effect of plasma interactions with low-κ films as a function of porosity, plasma chemistry, and temperatureJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2005
- ZnO: growth, doping & processingMaterials Today, 2004
- Low dielectric constant materials for microelectronicsJournal of Applied Physics, 2003
- Factors affecting an efficient sealing of porous low-k dielectrics by physical vapor deposition Ta(N) thin filmsJournal of Applied Physics, 2002
- Characterization of low permittivity (low-k) polymeric dielectric films for low temperature device integrationJournal of Vacuum Science & Technology A, 2002
- Remote Plasma-Enhanced Chemical Vapor Deposition of Nanoporous Low-Dielectric Constant SiCOH Films Using VinyltrimethylsilaneJournal of the Electrochemical Society, 2002
- Effect of oxygen plasma exposure of porous spin-on-glass filmsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2000
- Templating Nanoporosity in Thin-Film Dielectric InsulatorsAdvanced Materials, 1998